Series 3 Intermittent Stalling

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
The ends of the hoses on the fuel filter look a little suspect but not leaking.
Usually the ignition coil would be fitted with HT coming off the base ie vertically with connections on base , originals where oil filled with transformer type oil.
Did a web search and some show horizontal others angled some vertical.
What make is that coil and was there any instructions re fitting?
 

Attachments

  • Coil location.jpg
    Coil location.jpg
    50 KB · Views: 132
The ends of the hoses on the fuel filter look a little suspect but not leaking.
Usually the ignition coil would be fitted with HT coming off the base ie vertically with connections on base , originals where oil filled with transformer type oil.
Did a web search and some show horizontal others angled some vertical.
What make is that coil and was there any instructions re fitting?
So it is a Bosch coil - brand new. Fitted to the bulkhead in the same manner as the one it replaced. No instructions but the clamping bracket mounting holes in the bulk head orientate the coil as it is - I would have to drill new mounting holes to fix it vertically. Anyway - seems to be performing ok as it is.
 
Back
Top