EAS Delay Timer Relay

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

rangiep38

New Member
Posts
248
Location
Sunny Scotland
Does anyone know if i remove the delay timer relay will this cause my eas to go into fault mode?:confused:
The reason i ask is i`m having problems after having a reset where there is no power clicking the relay:mad: over and would like the car to stay up when inflated as oposed to lowering everytime a door is opened and closed.
 
Well i still havnt had any luck so i got the car up and removed the delay timer relay and it beeps SLOW 35MPH MAX but luckily its fine when i put it back in, for now anyway.
 
Pointless, just pulling the relay stops the EAS self levelling. Mine stays up when left for 3 weeks at any angle unless it's very windy.
Yes it does however if I decide to use it to quickly nip to the shops I would get max 35mph on dash, this way I dont.
Your drive is obviously not the same as mine then
 
Yes it does however if I decide to use it to quickly nip to the shops I would get max 35mph on dash, this way I dont.
Your drive is obviously not the same as mine then

That is because you either have a leak from the tank and NRV2 is failing or the compressor is weak or diaphragm valve is leaking. You need to do some checks. Look in tech archive for info.
 
Back
Top