Hey , new to page , just tryIng to figure the site out seem alot of useful threads , looking to see if the site can help me out or even direct me to a link that may help .
I have an 02 L322 Rangerover HSE with an air suspension fault , I’m in the process of diagnosing the fault,
So far I have found 2 damaged height sensors so I have replaced but still the suspension at the rear stays raised and the front touching the ground .
I can hear compressor working
I have removed The two wheel well trims and sprayed with soapy water on the valves no leaks found . When removing the nuts with the pipes into the valves I can the hear it depressurising but the front it seems no air is reaching the valve as I cracked and heard no air ... any ideas ??
I have an 02 L322 Rangerover HSE with an air suspension fault , I’m in the process of diagnosing the fault,
So far I have found 2 damaged height sensors so I have replaced but still the suspension at the rear stays raised and the front touching the ground .
I can hear compressor working
I have removed The two wheel well trims and sprayed with soapy water on the valves no leaks found . When removing the nuts with the pipes into the valves I can the hear it depressurising but the front it seems no air is reaching the valve as I cracked and heard no air ... any ideas ??
