Discovery 4 gear selector stuck

Phillipssam · Nov 13, 2019

Hello
I have an issue with my disco 4. I can get the engine to start but the gear selector will not turn from P. It rises up but will not turn. Brake pedal pushed and all brakes lights working. I have tried a hard reset (disconnecting negative battery lead for 20mins) and still the gear selector is locked in P. Can anyone shed any light on what the issue might be?! Many Thanks

JohnM70 · Nov 13, 2019

Phillipssam said:
Hello
I have an issue with my disco 4. I can get the engine to start but the gear selector will not turn from P. It rises up but will not turn. Brake pedal pushed and all brakes lights working. I have tried a hard reset (disconnecting negative battery lead for 20mins) and still the gear selector is locked in P. Can anyone shed any light on what the issue might be?! Many Thanks

Please re-post in the Discovery Section.

@blue beasty

Phillipssam · Nov 13, 2019

I tried loads of other sections and this was the only one that would let me post...all the others said I didn't have the right permissions?!

Hippo · Nov 13, 2019

Welcome to the forum

Ask in the discovery section. If they dunt know then the same powered lift n turn gear selector is used on rr's so ask in the range rover section.

Main forum index:
www.landyzone.co.uk/forum

Discovery:
https://www.landyzone.co.uk/forum/land-rover-discovery.8

Range Rover:
https://www.landyzone.co.uk/forum/range-rover.10

GrumpyGel · Nov 14, 2019

Alternatively, ask in a decent forum...

https://www.landyzone.co.uk/forum/land-rover-freelander.9/

Begin your question something like, "I'm fed up with my current pile of shite, recommendations for a decent vehicle please".

lynall · Nov 14, 2019

Phillipssam said:
Hello
I have an issue with my disco 4. I can get the engine to start but the gear selector will not turn from P. It rises up but will not turn. Brake pedal pushed and all brakes lights working. I have tried a hard reset (disconnecting negative battery lead for 20mins) and still the gear selector is locked in P. Can anyone shed any light on what the issue might be?! Many Thanks

If you put your location there might be someone near with a code reader.
If no go join the D3/4 forum and ask on there.

GrumpyGel · Nov 14, 2019

If its the same one as on Evoque, I know they had quality issues initially (shock horror!) with the mouldings on the bits that could catch - but I believe that stopped it poppin up, not turning.

Phillipssam · Nov 14, 2019

Thanks everyone will repost in disco forum

Discovery 4 gear selector stuck

Phillipssam

New Member

JohnM70

Seen Your Member

Phillipssam

New Member

Hippo

Lord Hippo

GrumpyGel

Well-Known Member

lynall

Well-Known Member

GrumpyGel

Well-Known Member

Phillipssam

New Member

Similar threads