Swivel pin bolt size

bluedog333 · Oct 30, 2019

Al2O3 said:
Baileys is a luxury in our house. The Mrs loves it and I nick some all the time

My problem is I start out with ‘reasonable’ sized measures and then end up using pint glasses. It’s bloomin lovely stuff.

Al2O3 · Oct 30, 2019

bluedog333 said:
I won’t be in a hurry to see it again. The concept probably sounded good on paper, but in reality it was awful.
Ended up watching a documentary on the 40s/50s boxer Freddie Mills. Fascinating story and quite sad towards the end.

I don't bother much with rugby 7's so 5 in the pitch made me wonder. I know the pitch is smaller.
Never heard of Freddie Mills. I'll google him though.

Al2O3 · Oct 30, 2019

TorsionBhudda said:
Sorry I got all confused never read your post properly Yeah the bottom pin bolts are M8 still 10.9 I believe as part of the steering and suspension.The tops are M10 and the bolts that connect the swivel to axle are M10. If your in Alloa it may be worth giving Gemm 4x4 a call they might have them in stock and they are only in Larbert,Falkirk. 01324 557735 is their number.

Interesting, I'll have a bother when I come to swap my bottom ones.

Galladog · Oct 30, 2019

TorsionBhudda said:
Sorry I got all confused never read your post properly Yeah the bottom pin bolts are M8 still 10.9 I believe as part of the steering and suspension.The tops are M10 and the bolts that connect the swivel to axle are M10. If your in Alloa it may be worth giving Gemm 4x4 a call they might have them in stock and they are only in Larbert,Falkirk. 01324 557735 is their number.

Dismantled the swivel today without too much hassle, the bottom pin bolt is M8X30.
Already ordered new bolts to go with the pin kit.
The bottom bearing,the cage in which the rollers fit was bent, it might have happened when I was crossing a river at work last week and hit some underwater boulders that had been washed down in a spate.

Al2O3 · Oct 31, 2019

Galladog said:
Dismantled the swivel today without too much hassle, the bottom pin bolt is M8X30.
Already ordered new bolts to go with the pin kit.
The bottom bearing,the cage in which the rollers fit was bent, it might have happened when I was crossing a river at work last week and hit some underwater boulders that had been washed down in a spate.

That must've made a hell of a bang.

TorsionBhudda · Oct 31, 2019

Galladog said:
Dismantled the swivel today without too much hassle, the bottom pin bolt is M8X30.
Already ordered new bolts to go with the pin kit.
The bottom bearing,the cage in which the rollers fit was bent, it might have happened when I was crossing a river at work last week and hit some underwater boulders that had been washed down in a spate.

Did you try Gemm 4x4 They might have the parts on the shelf.

Galladog · Oct 31, 2019

It was one of several bangs ! The landy is off road every day from July until Febuary up mountain tracks.
It does take a pounding, my colleagues 09 plate Hilux snapped its chassis just in front of its tow bar mount leaving the rear bumper and part of the chassis still connected to the Argo and trailer as he carried on driving !!!

Galladog · Oct 31, 2019

TorsionBhudda said:
Did you try Gemm 4x4 They might have the parts on the shelf.

I got all the parts from Craddocks, whenever I have tried phoning Gemm the phone rings out.

Swivel pin bolt size

bluedog333

Well-Known Member

Al2O3

Well-Known Member

Al2O3

Well-Known Member

Galladog

Well-Known Member

Al2O3

Well-Known Member

TorsionBhudda

Well-Known Member

Galladog

Well-Known Member

Galladog

Well-Known Member

Similar threads