Freelander 1 Clutch change - need HELP! - Freelander 1, 1.8 Petrol, 2001

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

chkto1000

Member
Posts
24
Location
not here for sure
OK, so I decided to tackle myslef with the mission of replacing the clutch on my car alone.

Can you give me any advice, TIPS, or any good tutorial for this assignment?

Do you think that Rave manual is better than Haynes (especially for this job), or should I buy this one as well?

Please note that I never did such a thing myself, but am happy to learn, so please do not hesitate to assist.

THANXXX!
 
Haynes will give you the information you need, it’s written for the amateur mechanic so quite easy to follow,
The RAVE will give much more detail information but aimed at the professional mechanic with all the tools for the job,
 
Here is a thread I started before doing the same job myself
https://www.landyzone.co.uk/land-rover/k-series-clutch-replacement.296104/
And many of the jobs are the same on a TD4 so check out this 'How to' as well/
https://www.landyzone.co.uk/land-rover/clutch-change-in-a-td4-list-of-jobs-to-do.315242/

Give yourself a full weekend including Friday night and go for it.
Good luck.
Thanks a lot - will update.

What do you think: this part fits my model (Freelander 1.8 Petrol, 2001)? The model listed are only Diesel, but I thought the required part is the same...? Do you know this brand at all? Should I purchase it at all, or not?

https://www.ebay.co.uk/itm/LAND-ROV...352610828423?_trksid=p2349526.m4383.l4275.c10
 
What do you think? a good kit? any comments?

Britpart don't have a good reputation for quality. I can't imagine they make there own clutches, but in general there stiff is very low quality.

If you're not planning on keeping the car, then it'll probably keep you on the road for minimal outlay. However if you plan on keeping the car for a while, it's worth spending a bit more and get a premium brand. Luk, Valeo or Borg and Beck are the clutches worth fitting. ;)
 
Good remarks, people.
I will search for a good kit. I ordered now Haynes. Let's see if I can understand the process , once it arrives.
Isn't there somewhere some kind of real step by step guide, accompanied with clear photos, of how to do this clutch on 1.8 petrol?
 
If you look carefully through the two links I posted earlier there is a full step by step for a TD4 and a more or less step by step for the K series.
Follow the TD4 steps up to the point where the clutch is mentioned, then the k series steps.
 
Back
Top