P38A MOT passed!

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
straight out pipe that is massive! Looks more like it came off an Evo!
Mine was straight through rear pipe when I had it. Bout 3 1/4” bore!
May have been fitted for off-roading, May have been welded up after off-roading as rear box is main target to get ripped off

Don’t understand what you both mean the angle is off? Could be adjusted slightly but not much, the snout points down, any other angle it would point in?
 
Mine was straight through rear pipe when I had it. Bout 3 1/4” bore!
May have been fitted for off-roading, May have been welded up after off-roading as rear box is main target to get ripped off

Don’t understand what you both mean the angle is off? Could be adjusted slightly but not much, the snout points down, any other angle it would point in?

Snout is pointing the right way but think my back-box has a horizontal oval shape, rather than an inclined oval when fitted. Not noticeable on yours because that bl**dy Land Rover badge on the wrong level is pulling your eyes to the left with a full-frontal assault on the optic synapses.
 
Seen some steel ones are a box sticks out like a twin, will get crumpled first time you descend steep hill off-road
ESR 3538 type -
E37BF09C-2E38-45CD-8087-163A4642E1DC.jpeg
 
Mine was straight through rear pipe when I had it. Bout 3 1/4” bore!
May have been fitted for off-roading, May have been welded up after off-roading as rear box is main target to get ripped off

Don’t understand what you both mean the angle is off? Could be adjusted slightly but not much, the snout points down, any other angle it would point in?
Boxes are horizontal on mine.
 
Back
Top