Quick soundproofing question!

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

flokkie-b

Member
Posts
28
Location
Leeuwarden, the Netherlands
Hi guys!

Quick question!
I built a new flatbottom seatbox and stripped down the bulkhead for the 110 hardtop. Now I'm at the point of ordering Kilmat 80 sound deadening, but how much would you reckon I need?
The tub/back bottom is already lined with 12mm Dodomat, so I am only gonna do bulkhead, front floor, sides and roof!
Thanks in advance!

(few photos to illustrate the new seatbox)
 

Attachments

  • IMG_2319.jpeg
    IMG_2319.jpeg
    215.4 KB · Views: 222
  • IMG_2320.jpeg
    IMG_2320.jpeg
    234.6 KB · Views: 108
  • IMG_2321.jpeg
    IMG_2321.jpeg
    249.2 KB · Views: 93
  • IMG_2323.jpeg
    IMG_2323.jpeg
    206 KB · Views: 154
  • IMG_2324.jpeg
    IMG_2324.jpeg
    195.6 KB · Views: 87
I used silent coat and used 2 boxes total of 80 sheets @ 375mm x 250mm each sheet to do the front off my 90. Hope this helps.
 
I ended up making about 3 orders of SilentCoat. I think I went through 5 or 6 bulk boxes doing the roof, floors, seatbox, doors - everywhere I could get at. These guys deliver pretty quickly (https://www.deadening.co.uk/collections/silent-coat), but even so I would order more than you think you are going to need so you aren't hanging around waiting - getting it applied is a quick and easy job if you are already stripped down.
 
Mine took 3 x 50 boxes of the big silent coat tiles (more a3 than a4 size). It did everything including roof and bonnet. Put dodo over it. Made a big difference. Only thing I didn't do was door panels (yet). In terms of dodo I did roof, side panels bulkhead and seat box with two 10m rolls.
 
Back
Top