abs light

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

ss9900

Member
Posts
12
Location
gloucester
hi

I had some lights come on on my disco2 td5 had it on a diagnostic code reader and the following photos show the faults what I would light to know is will these faults bring on the lights also in a photo many thanks for any help
 

Attachments

  • 20190803_200402.jpg
    20190803_200402.jpg
    189.5 KB · Views: 117
  • 20190814_144215.jpg
    20190814_144215.jpg
    613 KB · Views: 109
  • 20190814_144209.jpg
    20190814_144209.jpg
    640.4 KB · Views: 130
many thanks for that going to order a new shuttle valve but one that has been moded as I am not very electrical minded
 
Its really not that hard to modify but if you can get hold of a modded one then saves 10mins. You still need to earth and splice to the loom wire, ecu side of the loom not plug side.
Get a wabco one as they are effectively a genuine part just no LR badge and cost. Loads online around £35
Test it first using a multimeter
Best of luck
 
If that whole list of codes comes back after they were erased then only the SVS will not cure things... can you see the HDC warning after ignition?
 
Back
Top