Black Door Cards

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

ivancrx

Well-Known Member
Posts
601
Location
Burton on Trent
Has anyone had any experience of the Black Door Cards that are available from Britpart, I know but it is a non mechanical part so what can go wrong?

I have a red and black theme on the 90 and it looks silly with the original grey door cards

Are they the same sort of finish as the original ones or will i be disappointed and wish I hadn't bothered?

These are the ones I have been looking at

https://www.ebay.co.uk/itm/FRONT-DO...LACK-FOR-PUSH-BUTTON-DOOR-HANDLE/163200216825ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649
 
Would you try spraying your old ones?.....

38608209225_c8a067f56d_c.jpg


39473989462_c80b018f2e_c.jpg
 
The aftermarket ones are a (fairly) rigid plastic and not soft like the OE ones so if you don't want this finish then don't go for the aftermarket ones (BP or otherwise).
 
Hi Simon, I just used a cheap Matt Black, no preparation other than a good wash and dry. They've held up really well other than a few scuffs from feet near the bottom....
Thanks very much. I've bought some primer, paint and lacquer (and some door card removal tools - awaiting arriving). Going to be a job for September.
 
Back
Top