No doubt another no-brainer, but here goes. My steering groans when used at low engine rpm. People tell me that the steering box needs replaced (££££££), but I suspect the system needs bled. Looking at the manual Ch.57 p.10 it advises bleeding via a bleed screw, but where is the bleed screw? The manual is usually very comprehensive, so maybe I am reading it upside down......
Bleeding a P38 steering system
- Thread starter Catch22
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
it wont need bleeding it has a feed and a return so is self bleeding poor pump is usual issue,
RangeRoller dt
Well-Sprung Member
- Posts
- 14,261
- Location
- Trapped inside my head @ LZ asylum
They are a ££££ part as you say, but you may get a decent one cheap enough off a scrapper
- Posts
- 18,954
- Location
- Buckinghamshire, UK. ('95 DT)
Try dropping the ATF out of the steering pump reservoir and replacing the fluid. Might take a few attempts to get it flushed through. If it makes a difference, happy days. If it doesn't, well, your wallet will be raped.
Datatek
Well-Known Member
- Posts
- 43,918
- Location
- Near Poitiers SW France
I agree, well worth a fluid change, made a difference on my project car.
