Bolts Missing (various)

while the 110 300tdi was on the ramp and in the shop I noticed 3 bolts - 1 def missing, 2 apparently not according to mechanic but wanted to double check

1) turbo to manifold (no pic, but googled a few times and cannot see a reference to what thread / size so I can order one. The three I have seem to hold boost ok, but...

2) clutch housing, see pic

3) in front of sump, see pic

Front sump & gearbox are for wading plugs.

There not “missing”

great thanks

Hicap phill said:

Front sump & gearbox are for wading plugs.

There not “missing”

Click to expand...

If you are regular in deep water wading plugs need to be fitted but also need to be removed quite often to allow any oil that may have collected to be drained.

tottot said:

If you are regular in deep water wading plugs need to be fitted but also need to be removed quite often to allow any oil that may have collected to be drained.

Click to expand...

what about occasional wading? do you need plugs?

glad I asked now.

Anybody know re the size and thread of the 4 turbo to manifold screws btw?

cborrman said:

what about occasional wading? do you need plugs?

glad I asked now.

Anybody know re the size and thread of the 4 turbo to manifold screws btw?

Click to expand...

manifold to head ?turbo is part of the manifold

jamesmartin said:

manifold to head ?turbo is part of the manifold

Click to expand...

true, apologies for confusion, this pic is not my engine or standard turbo but bolts I am talking about easy to see and have added a red circle

cborrman said:

true, apologies for confusion, this pic is not my engine or standard turbo but bolts I am talking about easy to see and have added a red circle

Click to expand...

that is not a std 300 turbo more like a vnt upgrade, if the nuts are 13mm the studs m8 x1.25

Was it in arkwrights shop