Datatek
Well-Known Member
- Posts
- 43,876
- Location
- Near Poitiers SW France
Correct, but there is no info on whether or not the FOB operates the central locking, so it could be an immobiliser problem, re-syncing the FOB may clear that.
P38 help!
- Thread starter p38range
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 58,170
- Location
- Preston Lancs.
If the fob is synced it can clear engine immobilisation or need for EKA, as sometimes pressing buttons with ignition key in ignition lock can. But if the fob is not synced and EKA code is needed it will do nothing. EKA code must have been entered and accepted before fob can be synced, but this is nothing to do with BECM to ECM sync which is the problem he has. Only diag can cure that.
Datatek
Well-Known Member
- Posts
- 43,876
- Location
- Near Poitiers SW France
Much as I said in post #19
- Posts
- 58,170
- Location
- Preston Lancs.
RangeRoller dt
Well-Sprung Member
- Posts
- 14,253
- Location
- Trapped inside my head @ LZ asylum
If Rick can’t do it ; it can’t be done 
Rick-the-Pick
Active Member
- Posts
- 782
- Location
- Hove, Sussex.
I'm on this one.
It has a few issue's. It looks like the system has been spiked at some point.
It's more than just diagnostics on this one.
I'll tell you something, It's one of the best P38's out there.
It has a few issue's. It looks like the system has been spiked at some point.
It's more than just diagnostics on this one.
I'll tell you something, It's one of the best P38's out there.
- Posts
- 15,096
- Location
- Benfleet, Essex
Well, we clearly need LOTS of pictures then @p38range ;-)
RangeRoller dt
Well-Sprung Member
- Posts
- 14,253
- Location
- Trapped inside my head @ LZ asylum
Yes I wanna see it, even though I like the grubby ones
- Posts
- 15,096
- Location
- Benfleet, Essex
Very Nice indeed.
- Posts
- 18,941
- Location
- Buckinghamshire, UK. ('95 DT)
Tell him it's f*cked. Bag of midget gems in the post!
- Posts
- 15,096
- Location
- Benfleet, Essex
How many miles on the clock? The car, not the wife.... of course.
- Posts
- 18,941
- Location
- Buckinghamshire, UK. ('95 DT)
Might be worth a swap.
Last year I swapped mine for a Stihl jetwash. Awesome bit of kit. Unfortunately the bloke reneged and I had to take her back.
It’s got 135000 I think or 131000 can remember and I’ve been looking at it everyday for the past week!
The cars got about the same too
Derv definitely turns over but won't fire. Don't know about the v8 though.
- Posts
- 18,941
- Location
- Buckinghamshire, UK. ('95 DT)
Think GEMS doesn't. The diesel and Thor were sort of cut and shut job so not as integrated into the BECM as the GEMS.
- Posts
- 15,096
- Location
- Benfleet, Essex
Thor 4.6L engine 2000 MY (like mine) will not do a thing. Just says "Engine Disabled" on the centre console if it has lost sync with the key.
