What have you done to your Landie today.
- Thread starter madfrank
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
All good, home safe and all fixed, had to buy a recip saw to cut through the lower ink bolts as they were well and truly seized, but all good now thanks.
These bushes being bearmach cranked arms have a special upper bush, the internal diameter on the poly part is not the same as the std units.
Cheers
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
Rear upper trailing arm bush, snapped, had to drive sideways, was like driving an old mini traveller.
Cheers
- Posts
- 9,018
- Location
- North Lincs
We lost another one just outside of Northampton (the military 90) but I think everyone else made it 
We have stopped for something to eat just outside of MK
We have stopped for something to eat just outside of MK
doriz
Well-Known Member
- Posts
- 16,782
brilliant
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
We lost another one just outside of Northampton (the military 90) but I think everyone else made it
We have stopped for something to eat just outside of MK
Blimey , you are running late. Hope everyone else gets to the end.
I heard it was timing belt on the 90, is that so?
Cheers
- Posts
- 9,018
- Location
- North Lincs
Yes, they heard it snap!! I towed them to the main road. Felt nice to be able to help someone else for a change
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
Yes, they heard it snap!! I towed them to the main road. Felt nice to be able to help someone else for a change
Nice, so did you complete all the lanes?
Cheers
Scooby22
Well-Known Member
- Posts
- 1,228
- Location
- County Durham
Finally got round to changing the oil and filters, all carried out without any drama or anything going wrong, like centrifugal oil filter threads stripping, even managed to get cartridge oil filter off without a struggle and new one spun straight back on, must be my lucky day.
- Posts
- 9,018
- Location
- North Lincs
doriz
Well-Known Member
- Posts
- 16,782
Indeed I did and very happy I am too
All that work has paid off. Now you have a very reliable truck
- Posts
- 9,018
- Location
- North Lincs
I must admit it has given me confidence to sign up for another weekend trip......
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
They do that.....and then........???.............LOL. She did better than mine.
Cheers
- Posts
- 9,018
- Location
- North Lincs
I must admit, I thought when I hit that big hole, I had done some damage. Strangely the steering became better for the rest of the trip
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
I must admit, I thought when I hit that big hole, I had done some damage. Strangely the steering became better for the rest of the trip
Mine was not bad, it just meant that when I changed gear it wanted to go to the left .....LOL.
Cheers
scottonthefen
Well-Known Member
- Posts
- 532
- Location
- England
Went to fit the new rear plate lamp. Found it wanted bullet connectors instead of the lucars on the wiring. Bought some bullet connectors. Currently scratching head about crimping them. Cheapest "Bullet crimpers" I can find are nearly 10x the price of another rear plate lamp. Wondering if my pike trace crimpers will work..
JimS
Well-Known Member
- Posts
- 9,654
- Location
- Not far enough away from London
Yesterday sorted out & painted the rear crossmember
Today MOT'd, passed no advisories
Guess it'll be making it to Simply Land Rover at Beaulieu in a couple of weeks then...
Today MOT'd, passed no advisories
Guess it'll be making it to Simply Land Rover at Beaulieu in a couple of weeks then...
JimS
Well-Known Member
- Posts
- 9,654
- Location
- Not far enough away from London
Went to fit the new rear plate lamp. Found it wanted bullet connectors instead of the lucars on the wiring. Bought some bullet connectors. Currently scratching head about crimping them. Cheapest "Bullet crimpers" I can find are nearly 10x the price of another rear plate lamp. Wondering if my pike trace crimpers will work..
(Quite a few) years ago I worked for AMP (the connector co). I remember touring the factory of a well known motorbike manufacturer and they were using filed out cutting pliers... and they wondered why their reliability was so poor compared to their Japanese competitors
- Posts
- 337
- Location
- Poole Dorset
Started trimming a piece of metal to fit into a hole on the series 3 bulkhead. Then trimmed it a bit more etc etc, then went in for tea before going up the pub.
- Posts
- 7,767
- Location
- East Midlands
Loaded my roofrack up with the merry, merry pipes and set off for my smallholding:
![IMG_0090[1].JPG](https://www.landyzone.co.uk/attachments/img_0090-1-jpg.181279/ "IMG_0090[1].JPG")
Unfortunately as I headed west, I only got as far as the Coleshill turn off when the wipers stopped working.
I stopped in Coleshill and had a bit of a fiddle, tried different fuses, and discovered that there was no sign of 12V on any of the multiplug terminals at the wiper motor. OK, I'll limp home between the showers on the minor roads. But I got as far as Nuneaton and started emitting steam. On lookng under the bonnet it was clear that there was a major coolant leak. OK, time to call the AA. The man came out and put loads of water in and eventually the leak was apparent. It's only a hose, thank goodness. Temporarily patched, so that was good. Then he fixed the wipers. Apparently, although they didn't work with any of my spare fuses, they did with one of his. I feel such an idiot. Maybe it was just dirt on the contacts in the fusebox. Alternatively I might have another of those intermittent wiring loom faults which plague my Land Rover. Anyway, I've come home again, complete with pipes and an awaiting delivery of the correct hose, not wanting to attempt a long journey on a patched one.
Unfortunately as I headed west, I only got as far as the Coleshill turn off when the wipers stopped working.
I stopped in Coleshill and had a bit of a fiddle, tried different fuses, and discovered that there was no sign of 12V on any of the multiplug terminals at the wiper motor. OK, I'll limp home between the showers on the minor roads. But I got as far as Nuneaton and started emitting steam. On lookng under the bonnet it was clear that there was a major coolant leak. OK, time to call the AA. The man came out and put loads of water in and eventually the leak was apparent. It's only a hose, thank goodness. Temporarily patched, so that was good. Then he fixed the wipers. Apparently, although they didn't work with any of my spare fuses, they did with one of his. I feel such an idiot. Maybe it was just dirt on the contacts in the fusebox. Alternatively I might have another of those intermittent wiring loom faults which plague my Land Rover. Anyway, I've come home again, complete with pipes and an awaiting delivery of the correct hose, not wanting to attempt a long journey on a patched one.
Last edited:
