Marmaduke
Well-Known Member
- Posts
- 9,773
- Location
- Near the land of 'Me Duck'
That's because my Doris 'encourages me' to keep the room tidyHaha not what I was expecting ya messy git,
(or at least be able to close the door)
Thoughts and advice on Spanners
- Thread starter exmed wayne
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
(or at least be able to close the door)
Marmaduke
Well-Known Member
- Posts
- 9,773
- Location
- Near the land of 'Me Duck'
Apart from when I changed the front radius arms and did some welding I can't remember the last time I took a hammer to itEven I've got more than that.
Don't know how to use them though
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
Poof!
A cranked fan spanner hooked on one of the pulley bolts and levered over the socket works as well
To undo the dog nut on a 300tdi crank?
Cheers
Bobdog
Well-Known Member
- Posts
- 4,286
- Location
- Horsham West Sussex
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
Bobdog
Well-Known Member
- Posts
- 4,286
- Location
- Horsham West Sussex
Well... no... I used the 'breaker bar on the chassis and turn the engine over' method. But I tightened it up with a fan spanner/scaff bar/breaker/ 2 of us pulling like the hulk on each side, in the absence of a torque wrench. When we did get hold of one later, it was at about 440NM...
Marmaduke
Well-Known Member
- Posts
- 9,773
- Location
- Near the land of 'Me Duck'
I undo mine with an impact gun
exmed wayne
Well-Known Member
- Posts
- 250
- Location
- On my way to Scotlandshire
Oh dear...
Googles and Fleabay just made these fall through my door
It was an accident - I didn't mean to buy them, but they were cheap and I came over all funny like.
Snap on sockets £40
Britool 6 point spanners £25
Googles and Fleabay just made these fall through my door
It was an accident - I didn't mean to buy them, but they were cheap and I came over all funny like.
Snap on sockets £40
Britool 6 point spanners £25
- Posts
- 11,563
- Location
- Far out West
I've got all sorts. At work I use a kamasa 3/4 socket set 22mm - 50mm. It's not unusual to have a three foot bar on the end when working on tractor or implement stuff. I have snap on sockets, ratchets and spanners - all second hand. Sykes pickavant sockets and spanners and lots of old britool, king dick and gedore?
Snap on tools.. the stuff you use most braker bars.. ratchets, guns and decent socket set and spanners.. (lose one out of the set it will bug the life out of you..) and its about £100 to replace it.. and never show your misus the weekly recipts!! But got some cheep spanners and tools that you can just abuse..!!
Plant fitter..
Plant fitter..
Similar threads
