Rear axle sticking out

RH one also looks a bit bent where the rod joins the clevis

Shimsteriom said:

The wheels are the same offset aren't they.

Click to expand...

Sorry for the delay yes all the same

jamesmartin said:

links are on the wrong way round drivers side link should bolt to the top of pivot ,passenger side the bottom

Click to expand...

Cheers my man will get new one put on

jamesmartin said:

links are on the wrong way round drivers side link should bolt to the top of pivot ,passenger side the bottom

Click to expand...

Cheers will get new one at weekend

Kev12 said:

RH one also looks a bit bent where the rod joins the clevis

Click to expand...

Cheers for your reply

Crazydave1967 said:

Cheers my man will get new one put on


Cheers will get new one at weekend

Click to expand...

unbolt them and swap them over unless a bush is worn

Will try that first. But the bottom Bush looks knackered. Cheers

If bushes are worn, I fitted this to mine.

https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/132697907258

Everything's there for centre pivot and both link arms.

Seems expensive until you see how much genuine ones are. I took the linkage off myself, had old pressed out and these pressed in by local garage for £30, job jobbed

Sounds a plan to me .I have access to a press so will give it a go ..cheers my man

Did you mention the front was similar?

Better get some pics up while the guys are on a roll

J

Will post pictures tomorrow
Cause off for some shut eye up for work 1
30 am cheers everyone chat tomorrow

Hi everyone
Just a update on rear axle
All done and dusted .the watts linkage had been put on wrong way..all taken apart and put on right way..wheels are back under the arches ..just want to thank you all for you replys. Cheers people