bruce gunn
New Member
- Posts
- 3
- Location
- Cumbria
Can anyone tell me if the element spindle shaft is replaceable as mine has sheared at base of bowl. Hoping to remove stump with an easy out, or does whole unit need replacing. Thanks
Defender td5 oil centrifuge
- Thread starter bruce gunn
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Scooby22
Well-Known Member
- Posts
- 1,228
- Location
- County Durham
There are a couple of Centrifuge bodies on ebay at the moment, and very cheap.
I was going to put a link on but paste from clipboard does not work on landyzone site for some strange reason using my galaxy tab A,
I was going to put a link on but paste from clipboard does not work on landyzone site for some strange reason using my galaxy tab A,
Last edited:
bruce gunn
New Member
- Posts
- 3
- Location
- Cumbria
So I take it spindle shaft can’t be replaced? Need replacement unit. Thanks for reply
Scooby22
Well-Known Member
- Posts
- 1,228
- Location
- County Durham
Not sure if they can be replaced but if not there are on ebay if you need one.
bruce gunn
New Member
- Posts
- 3
- Location
- Cumbria
Similar threads
