*Please Help* TD5 low rev power issue

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
I read that if the MAF is faulty the engine will run better with the MAF unplugged as the ECU sets it to a default running mode, if the symptoms are still there you can discount the MAF as your problem.
If the problem goes it points to the MAF.
Scooby22, Next time I'm out and the problem manifests I'll pull over and disconnect the MAF, see if that makes any immediate difference :)
 
Have you checked intercooler and hoses for leaks/ delamination? Cleaned MAP inside and out? If you’re not hitting the boost limit, try shortening the actuator rod a turn or too. Be good to get a gauge plumbed on the inlet manifold.

I have opposite problem
 
Have you checked intercooler and hoses for leaks/ delamination? Cleaned MAP inside and out? If you’re not hitting the boost limit, try shortening the actuator rod a turn or too. Be good to get a gauge plumbed on the inlet manifold.

I have opposite problem
Yes mate. Changed all for silicon.
 
MAP sensor. After all I've done a guy with a nanocom and some spares sorted me out :)
Whoever called it, I'll listen more attentively next time.
 
Back
Top