TD5 Geniune rev counter installation..

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Panner88

New Member
Posts
6
Location
London
Hi there!

Looking for a bit of guidance on the installation of a new rev counter to my (2000) TD5 defender in place of the old clock. I have read that there are two methods of installation by either..

Existing clock positive and earth to the new counter as well as a signal wire going to Pin 19 of the black plug on the ECU, (assuming using this crimp https://uk.rs-online.com/web/p/products/6795048/ )

or

Running to the "w" connection of the alternator? (Same theory as the signal wire to ECU?)

Just wondering if anyone has any experience of this?

Any help appriciated!
 
Ok ECU out, not really what I was expecting and can’t seem to locate pin 19 to connect speedo signal wire!

Anyone have any ideas which pin I should be looking at for the speedo wire?

Thanks guys
 

Attachments

  • B6CF84FF-92BB-4598-BC33-C04E93208607.jpeg
    B6CF84FF-92BB-4598-BC33-C04E93208607.jpeg
    270.8 KB · Views: 179
Back
Top