What did you do with your Range Rover today

frog hopper said:

@Datatek I think I might have sent you a pm.

Click to expand...

You have and I have replied

Grrrrrr said:

Good. That's progress!

Click to expand...

Power steering pipe, pump to box pipe..!!
Jeeze, How do I break the good news to Mrs Bagshot with this one..?
Joy.!

Datatek said:

You have and I have replied

Click to expand...

Reply received thank you.

Bagshot said:

Power steering pipe, pump to box pipe..!!
Jeeze, How do I break the good news to Mrs Bagshot with this one..?
Joy.!

Click to expand...

Post-coital with chocolates on standby.

I got the USB twin socket, anyone know the best place to pick up power? but not that its on all the time, I want it to come on with ignition only, also in the pic it looks a bit bright (mine is green light on it) can I somehow put it on the dimmer, so its the same as the dash? can some one run this through with me as I am no good at electrics, thanks, and I dont have that wire in the pic

Take the feed from the cig lighter in front of the gear stick. You will not be able to dim the back light unless you break the thing open to get at the LED driver circuit.
Does it fit the hole in the P38 dash?

I dont know, I will check now, thats where I do want to put it to fill the blank

Hi Guy's. I had to change the passenger door opener cable as mine snapped, but the big thing that bothered me was the door card clips, as most of them broke. So who has an idea as to where to buy replacements as I've looked on Rimmer Bros and Brit parts and cannot find them.

The width is very good, nice fit, but the height is just a little bit big, but just needs a file to the top and bottom

J L Carr said:

Hi Guy's. I had to change the passenger door opener cable as mine snapped, but the big thing that bothered me was the door card clips, as most of them broke. So who has an idea as to where to buy replacements as I've looked on Rimmer Bros and Brit parts and cannot find them.

Click to expand...

https://www.ebay.co.uk/sch/i.html?_...=door+card+clips+for+Range+rover+p38&_sacat=0

Datatek said:

Take the feed from the cig lighter in front of the gear stick. You will not be able to dim the back light unless you break the thing open to get at the LED driver circuit.
Does it fit the hole in the P38 dash?

Click to expand...

I suppose I could rig it up to the clock for dimming, but I will have to have it on all the time (unless I put a on/off switch on it) but I think the cig liter is the way to go. thanks

Does anyone actually use the dimming mode.. mine is always on full. But maybe that's just me.

Dopey said:

https://www.ebay.co.uk/sch/i.html?_...=door+card+clips+for+Range+rover+p38&_sacat=0

Click to expand...

Thanks Dopey. I must have been putting the wrong thing in Fleebay.

J L Carr said:

Thanks Dopey. I must have been putting the wrong thing in Fleebay.

Click to expand...

I just put what you asked for.... isn't that the way with the bay!!!

Bagshot said:

Does anyone actually use the dimming mode.. mine is always on full. But maybe that's just me.

Click to expand...

Its just I thought it might be too bright, but its probably ok

Water cooled

Bizarre..!!

Bagshot said:

Bizarre..!!

Click to expand...

When your going off roading in the SII, and you take her for a swim

Dopey said:

When your going off roading in the SII, and you take her for a swim

Click to expand...

My hero..!!!!!!!!!!

I started it on the drive as it was covered in frost to check the newly fitted front screen heating element and it cleared the best it ever has the last on only worked on half the screen, typically the passenger side so well happy.