Discovery 4 tow bar fitting

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

DFlandrover

Member
Posts
11
Location
Buckinghamshire
I have recently removed a fixed plate towbar from a 54 plate D3 hoping it would fit straight onto a new D4 however I am struggling to get hold of the bolts which hold the stay bars onto the chassis. I have attached a photo (isn't mine) which show the bolts required however I cannot find these separately. I was wondering whether any one has any or could point me in the right direction. Many thanks
 

Attachments

  • image.jpg
    image.jpg
    245.1 KB · Views: 140
The part that fits inside the chassis is usually on the car and you only remove the bolts at sway bar end to remove the tow bar.
 
It’s cheaper to buy the kit - the bolts through the chassis are available separately but are circa £50/side and the kit with all new bolts is circa £50 for the complete set
 
Back
Top