jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
pic 2Just ordering on ebay now. Is it one of these or a rubber thing? (pic 2) or something on pic 3
Faith in human beings
- Thread starter Mackers
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
cheers
You could bring a whip with you the next time you take your car to a mechanic? In fairness you took your car to a ''specialist'' for a none ''specialist'' job, a bit like going to a brain surgeon to have your fringe trimmed and expecting to pay trimmed fringe prices. Usually higher labour costs involved because they specialise in one type of vehicle. If you want to avoid these high labour costs dont go to a brain surgeon to have your fringe cut. Get quotes, it wasn't a difficult job and could not really have been botched, straight forward and easy, anyone could have done it. You live and learn fella.
Another thing you really must do, if you want to do your own work, dont use a Haynes, buy a proper land rover work shop manual and parts catalogue, you can pick them up on eBay, make sure they are specific to your vehicle type and year. Haynes is a comic in comparison.
Love it. I'd look a right monkey with a fringe though.
That leak off pipe doesnt look right to me. Id be checking for diesel there too.
- Posts
- 8,705
- Location
- Solent
I have, but it's a bit too complicated at the moment.+1, next to useless, yours truly..
You've downloaded the RAVE an all that have you?
Last edited:
What's up with your rave mackers? Full fender manual is online too. When you start doing jobs yourself, have a look on land rover toolbox videos on YouTube. Most maintenance jobs for fender are on there and he put links to parts abd useful tools.
Your post style leads me to think you're a bright enough man - there's not much that's complicated unless looking to rebuild steering boxes, diffs engines etc. Maintenance is really not difficult once you have fundamentals and safety in mind. You will have to keep adding to tools. Don't bother buying muck- you'll just buy twice.
Hiya. Yeah I've got it. I'm gonna have another browse through it over the weekend
ghound
Active Member
- Posts
- 61
- Location
- northern ireland
I spent 2 hole days welding up a scrappy chassis, it was for a 'friend of a friend' so because it was a favor i went easy on him at £450, fecker thought i was taking the pi##, he said he thought it would be half that!
Hippo
Lord Hippo
- Posts
- 51,796
The cost of £70 labour per hour int just labour.
A garage incurs costs to run as a business. They need contents insurance, accountant, banking costs, phone bill, council tax/rates, advertising, water, electric, building repairs and rent... Not to mention the cost of replacing tools as they wear.
That dun't includes wages. What yer get in yer pocket as well as tax and pension contributions. Owner needs some profit anorl. Skip needs emptied. Fire extinguishers tested. Vat processing. Driving insurance. It all adds up. Office admin...
All of these costs and many more are totalled up then spread across their chargable hours. This will be split across the number of workers charging for jobs. That's the £70 per hour bit.
A garage incurs costs to run as a business. They need contents insurance, accountant, banking costs, phone bill, council tax/rates, advertising, water, electric, building repairs and rent... Not to mention the cost of replacing tools as they wear.
That dun't includes wages. What yer get in yer pocket as well as tax and pension contributions. Owner needs some profit anorl. Skip needs emptied. Fire extinguishers tested. Vat processing. Driving insurance. It all adds up. Office admin...
All of these costs and many more are totalled up then spread across their chargable hours. This will be split across the number of workers charging for jobs. That's the £70 per hour bit.
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
- Posts
- 8,705
- Location
- Solent
kurtjohnson10
Well-Known Member
- Posts
- 15,221
- Location
- midlands
Turboman
Mab An Gov
- Posts
- 60,151
- Location
- Lathrowda, Kernow
or there is not much oil been put in it
Very clean too be fair though
A properly maintained landrover doesn't leak oil. None of mine ever did.
kurtjohnson10
Well-Known Member
- Posts
- 15,221
- Location
- midlands
i have seen a few with cardboard/ drip tray under them when parked up over the years though .
Main one was the farmer who used to board our dogs while we were away. I told him every time that if he fixed the leak he would be able to retire with the cost saving.
Turboman
Mab An Gov
- Posts
- 60,151
- Location
- Lathrowda, Kernow
i have seen a few with cardboard/ drip tray under them when parked up over the years though .
Main one was the farmer who used to board our dogs while we were away. I told him every time that if he fixed the leak he would be able to retire with the cost saving.
So have I, and similar on British motorcycles, of which I have also had several. But it really isn't necessary, in either case, if you are conscientious about changing worn oil seals, and have good technique with gaskets and sealants.
kurtjohnson10
Well-Known Member
- Posts
- 15,221
- Location
- midlands
I totally agree, i would gladly pay to have any leak or defect repaired if it was beyond my capability.
I worry too much just to leave it and hope for the best.
