P38A Eas problems

hi last week I refurbished the eas compressor used the car a couple of times and all was good but this morning the rear bags were taking ages to inflate I tried plugging in the nanocom deflated all the bags then reinflated but now the compressor is running all the time but there's no air at all going into the bags and the car is on the bump stops any help much appreciated as I need to use the car in the morning 4.6 bosh 1999

Well as you've had the compressor to bits I'd check its air output for a start, check its actually delivering air

Yer it's been fine through the week parked car for few days and the bags stayed inflated I was thinking could it be a switch that stops it inflating like a door open but I've checked all the doors are closed

Well that might be, there's the little rubber o ring seal under the metal spring tang, if you replaced that, the screw might have worked loose?

I didn't replace that rubber ring

Checked the fuse and relay in fuse box all ok

Going to bite the bullet bye another compressor mines not putting out enough air am I right in thinking kurtjohnson does them for sale on here sometimes

pete12345 said:

Going to bite the bullet bye another compressor mines not putting out enough air am I right in thinking kurtjohnson does them for sale on here sometimes

Click to expand...

Yes believe so.