Steering box drop arm nightmare

agew · Oct 4, 2018

I was leant a mega mega puller designed for the job, with 1m extension bar (would hate to think what torque it was pulling), plus the 'clout both side of the taper' worked fine in the end........ Swearing helps a lot naturally..... Enjoy, A

Grebby · Oct 4, 2018

He's probably managed to sort it by now. The post is 5 years old and the OP hasn't been seen on here for 4 years.

raywin · Oct 4, 2018

Grebby said:
He's probably managed to sort it by now. The post is 5 years old and the OP hasn't been seen on here for 4 years.

Blimey time flys when you are having fun.
He may still be under there f'ing and blinding.

ogb · Oct 11, 2018

Grebby said:
He's probably managed to sort it by now. The post is 5 years old and the OP hasn't been seen on here for 4 years.

Yep -good point. Only got involved 'cos my local "wheel aligner" used a LOT of heat on my steering bits when doing the tracking. I wasn't happy and it cost him 2 hours labour and a new set of tre's and rod.

agew · Oct 12, 2018

T’was encouragement for Musicman’s weekend project rather than the OP....! Cheers, A

Steering box drop arm nightmare

agew

Active Member

Grebby

Active Member

raywin

Well-Known Member

ogb

Active Member

agew

Active Member

Similar threads