Rebuilding my 90

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Lol, where I come from its a big squash like a pumpkin .
Thought I'd ask when you liked the post.
It's a Geordie phrase for a friend. Really it's for a very close friend, but these days it gets used the same as you would say 'mate'.
The interpretation I was taught was that it was for someone who was as close to you as your bone marrow, abbreviated to marrow and in Geordie marra. The old Geordie words are falling out of use, but I like to chuck a marra in every now and then. :rolleyes::)
 
Few pics
 

Attachments

  • 5A263556-5978-4DF4-BEFA-2ECE7E1B6145.jpeg
    5A263556-5978-4DF4-BEFA-2ECE7E1B6145.jpeg
    333.9 KB · Views: 235
  • 34D54898-DBE6-4BB8-9401-91AB2E01AA82.jpeg
    34D54898-DBE6-4BB8-9401-91AB2E01AA82.jpeg
    484.8 KB · Views: 216
Update done 700 miles in “THE GENERAL” chased a few diesel leaks all sorted now but the ‘mark one’ gear selector I made as a feasibility study to see if it could be done worked a treat but as I built it without seals it leaked (go figure) so made a new oil tight version happy days on a foot note anybody no the boost psi on a standard 300 as mine is running 16PSI regards gatso
 

Attachments

  • ACC04279-4BE4-4DA4-9AB9-69D72735200F.jpeg
    ACC04279-4BE4-4DA4-9AB9-69D72735200F.jpeg
    311.9 KB · Views: 190
  • 80C4F524-E2AE-4C05-9244-A7A74F26F051.jpeg
    80C4F524-E2AE-4C05-9244-A7A74F26F051.jpeg
    253.5 KB · Views: 222
Update done 700 miles in “THE GENERAL” chased a few diesel leaks all sorted now but the ‘mark one’ gear selector I made as a feasibility study to see if it could be done worked a treat but as I built it without seals it leaked (go figure) so made a new oil tight version happy days on a foot note anybody no the boost psi on a standard 300 as mine is running 16PSI regards gatso
Very clever :)
Absolutely thrashing mine to within an inch of its life,uphill, I can get 0.9 bar on my gauge. That's 13psi. Mine is taken off the back of the manifold.
 
Very clever :)
Absolutely thrashing mine to within an inch of its life,uphill, I can get 0.9 bar on my gauge. That's 13psi. Mine is taken off the back of the manifold.
Yeah mine too off manifold at 16psi pulls like a train loves 3rd and 5 on motorway with the 1.2. Disco transfer box lot of gear changes around town but they are a “drivers car”
 
My 200 tdi is off the back of the manifold and shows just over one bar when pulling hard
 
Yeah mine too off manifold at 16psi pulls like a train loves 3rd and 5 on motorway with the 1.2. Disco transfer box lot of gear changes around town but they are a “drivers car”
Interesting. Yours is developing over 20% more boost than mine.
 
Interesting. Yours is developing over 20% more boost than mine.
Engine before rebuild inc turbo cam from a 50th anniversary edition disco wonder if they had a turbo tweek or po has been messing lol
 
:rolleyes::rolleyes::rolleyes:
Mine is 20 psi off a tee on the wategate pipe.

It goes OK

Cheers
Aye, but yours is anything but standard.
You're just trying to wind me up about my sh@t turbo :rolleyes:
If you don't pack it in I'll post that picture of my carb cleaner, just to mess with ya mind :D
 
Back
Top