Disco 1 Door window frame adjustment

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Mowog73

Member
Posts
50
Location
SW Ontario Canada
The window frame on the driver's door doesn't fit tight to the body seal at the upper rear corner. The fit is good at the front portion of the window and at the rear bottom of the window where the window frame meets the door. With the door closed, sitting in the driver's seat, you can see the gap increases at the top of the window frame from front (window frame is tight to the seal) to rear (window frame does not contact the seal). Otherwise the door's gaps are good and the door is flush the adjacent panels.

Can the window frame's position be adjusted?
 
Is it just the window frame or the whole door? If you check the door hinges there are usual spacers used adjust the position.
 
It appears to be just to window frame. The alignment of the door itself to the rear door and the fender are good. But I suppose a small adjustment at the door hinge would make a big difference at the top of the window frame.
 
Back
Top