Freelander 1 Newbie fed up with garages ripping me off

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Hi Col
Sourced them trough ebay but then went to them direct. I went for the whole 6 hoses and I got the T Bar clips as well. Just search "freelander hose kit" They are exceptional quality. But they might not fit haha
 
Ggggrrrrrrr
Been under the freelander and there is NO SUMP GUARD. As I look up all I see is sump and transfer box. Not sure if there is meant to be one. It’s a 2004 TD4 and I recon someone chucked it.
I am NEVER EVER EVER putting it in a garage EVER AGAIN (except for the things I cannot do of course)
 
Yeah you should have one there,is the ally frame still there and it’s just the plastic middle missing ?
 
Its probably not to uncommon.

Mine's a right pain to refit and sometimes I don't bother. I don't think it is much of a "guard", its definitely not going to stop a rock taking out your sump. I think its mainly a noise control device and oil catcher! Having said that, I always regret not putting it back on when I'm on a gravel road.

If you get one from a breakers yard make sure its from a similar year you yours as they changed at least once during production - probably safest making sure you get one from a TD4 as well as I think there may have been different ones for different exhaust routes/heat protection. Make sure you get all the fixing bolts as well if the frame @Danyou mentions is missing - there will be at least 6 'big' bolts (2 on each 'side' and 2 at the front) and 2 smaller ones (at the back screwing into the subframe). Mine has 8 big bolts (4 at the front), 2 small bolts and 2 screws (fixing to the valance) but I'm running an older L Series.
 
GrumpyGel said:
Its probably not to uncommon.

Mine's a right pain to refit and sometimes I don't bother. I don't think it is much of a "guard", its definitely not going to stop a rock taking out your sump. I think its mainly a noise control device and oil catcher! Having said that, I always regret not putting it back on when I'm on a gravel road.

If you get one from a breakers yard make sure its from a similar year you yours as they changed at least once during production - probably safest making sure you get one from a TD4 as well as I think there may have been different ones for different exhaust routes/heat protection. Make sure you get all the fixing bolts as well if the frame @Danyou mentions is missing - there will be at least 6 'big' bolts (2 on each 'side' and 2 at the front) and 2 smaller ones (at the back screwing into the subframe). Mine has 8 big bolts (4 at the front), 2 small bolts and 2 screws (fixing to the valance) but I'm running an older L Series.
Click to expand...
I think I read somewhere on here the facelift has some more fixings around the bumper area,don’t know if it would be a problem getting one off a pre facelift to fit as I have never taken mine off yet as someone decided to cut a hole in it for oil changes.
 
a female work colleague took her freelander to a local garage .52 plate td4 .for a new cat.
and a prop bearing. yes only one .she said it knocks when turning left or right so I had a look.the rear mount is new the front
had collapsed .so she took it back .he told her he packed it with silicone and it was fine.charged her just over 400 quid
is it possible to split prop on car .or would it have to come off .if so I dont understand why both weren't replaced at same time.
and also makes me think that certain garages think women are thick;and fob them off with any old b******t sorry for the long post.
 
ian mitchell said:
a female work colleague took her freelander to a local garage .52 plate td4 .for a new cat.
and a prop bearing. yes only one .she said it knocks when turning left or right so I had a look.the rear mount is new the front
had collapsed .so she took it back .he told her he packed it with silicone and it was fine.charged her just over 400 quid
is it possible to split prop on car .or would it have to come off .if so I dont understand why both weren't replaced at same time.
and also makes me think that certain garages think women are thick;and fob them off with any old b******t sorry for the long post.
Click to expand...
I should think you could split the props on the car - undo which ever end from the diff or IRD and separate from VCU. You'd need a hub puller capable of getting the bearing off though when the VCU is still on the car and some way of supporting the VCU. All ways up though, it would be easier to remove the complete assembly I'd have thought to split the props or pull/push the bearing.

You would think that anyone doing a "proper" job would replace both bearings at the same time.... unless of course you were looking forward to issuing a 2nd £400 invoice!
 
thanks for the reply .I never had to remove the prop on my fl1 as both bearings on mine were ok.so I didn't really know.
she believes because she is a woman and knows nothing about cars she may be taken advantage of .
he also has a Peugeot 308cc petrol of hers that he replaced a turbo on six months ago at a cost of 900 quid and has used 7ltrs of oil since. lifted bonnet and oil everywhere
he says he didn't have anything to do with that part of engine.also now rattles on top end .and has told her it is the variator for the vvt.
she is now looking at more expense.thanks for having time to read this post. p.s garage in wrose Shipley but don't know name.
 
ian mitchell said:
thanks for the reply .I never had to remove the prop on my fl1 as both bearings on mine were ok.so I didn't really know.
she believes because she is a woman and knows nothing about cars she may be taken advantage of .
he also has a Peugeot 308cc petrol of hers that he replaced a turbo on six months ago at a cost of 900 quid and has used 7ltrs of oil since. lifted bonnet and oil everywhere
he says he didn't have anything to do with that part of engine. also now rattles on top end .and has told her it is the variator for the vvt.
she is now looking at more expense. thanks for having time to read this post. p.s garage in wrose Shipley but don't know name.
Click to expand...
Tell her to tw** him with her hand bag. She needs to go to another garage.

I can't say all garages are a rip oft as that would be unfair and unjustified. But sadly there are some who will take a chance. If she feels she's being ripped oft due to being female she should take someone else with her.

It's possible to disconnect props/vcu etc whilst still on the car but it's far easier to do on the bench/floor with it taken oft in one piece. If left hanging in bits on the car you can put too much pressure on the joints, causing damage.
 
Hi
Danyou said:
Yeah you should have one there,is the ally frame still there and it’s just the plastic middle missing ?
Click to expand...

I’m not able to look under atm but I have had a look on google images and I have none of it. To be honest I’m probably going to leave it. It’s main duties are snow and ice and getting off car boot fields

Might end up buying a bleedin’ donor car at this rate he he
 
I tried buying another for parts/braking but ended up fixing it/getting it fixed (some parts I didn’t feel comfortable doing)I have just gave it to my father in law as he took a shining to it.
The undertrays are cheap enough and plentiful.
 
Danyou said:
I tried buying another for parts/braking but ended up fixing it/getting it fixed (some parts I didn’t feel comfortable doing)I have just gave it to my father in law as he took a shining to it.
The undertrays are cheap enough and plentiful.
Click to expand...
Yes I think that they are probably too nice to break. Having looked there are a few things that I know I will not do
 
Started the service eek!

Well what a day. Got under the bonnet and there were so many bits and bobs wrong that I shall not bore you. Got as far as changing the crank case filter and refitting it.

I am shocked at the amount of black crap in the air intakes never mind the intake housing. I tried vacuuming it out but it’s quite solid. I cannot do too much hacking as the crap will drop into the engine. Mrs. N (pink glove wearer) has come up with a plan involving sponge rolled up tight and carefully lowered in with large tweezers, then it will expand and effectively block the inlet while I clean the crud away from the top part. I’m never going to get it all but it will be a good start.

Going to leave it a while I need a few parts to come that I lost along the way he he

The engine must of been crying for air. See images
F23DFA50-7473-4137-9B9D-0856EABE8704.jpeg
D08D87B0-A11A-4A37-AAD3-DB613159C921.png
0B786D81-A651-4436-B2BF-288572B7685C.png
 
Impact wrench worked a treat on the stuck brake calipers bolts. Did them back up till I have some energy.

Attempted to undo wheel nuts with extended bar.

Pulled back, or ruptured kidney if I was being dramatic

Hurts to cough, sneeze & sit & hayfever sneezes are agony.

Why didn't I use impact wrench =.=
 
Bute said:
Impact wrench worked a treat on the stuck brake calipers bolts. Did them back up till I have some energy.

Attempted to undo wheel nuts with extended bar.

Pulled back, or ruptured kidney if I was being dramatic

Hurts to cough, sneeze & sit & hayfever sneezes are agony.

Why didn't I use impact wrench =.=
Click to expand...
Do you have a well trimmed beard and are fond of wearing tight trousers and no socks by any chance?

Col
 
You must log in or register to reply here.

Similar threads

P
Freelander 2 (LR2) INTERCOOLER TO MANIFOLD HOSE- Blowing off
Replies
1
Views
216
Nodge68
Nodge68
F
freelander 2 td4 2007 oil leak
Replies
5
Views
739
Nodge68
Nodge68
HeywoodFloyd
Freelander 2 eating its intercooler turbo hose
Replies
5
Views
863
Nodge68
Nodge68
S
Engine sound
Replies
18
Views
1K
kermit_rr
kermit_rr
H
Hi everyone
Replies
2
Views
410
Nodge68
Nodge68
Back
Top