2.25 Cylinder Head?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
T

The Observer

New Member
Posts
2
Location
London
A bit new to Landy Land, but i have seen a Cylinder head numbered RMC24844B that has hardened valve
seats, etc can i swap it for my head ERC5899CA .My vehicle is 1979 SWB 2.25 Series 3. I would be grateful for any guidance. And are there any Series landy people in South East London.Cheers.
 
The Observer said:
A bit new to Landy Land, but i have seen a Cylinder head numbered RMC24844B that has hardened valve
seats, etc can i swap it for my head ERC5899CA .My vehicle is 1979 SWB 2.25 Series 3. I would be grateful for any guidance. And are there any Series landy people in South East London.Cheers.
Click to expand...
head will fit but check compression ratio stamped on center of head lhs,hardened seats only need fitting to exhaust valves not a difficult job at a local head center
 
You must log in or register to reply here.

Similar threads

G
Coolant temperature sender Series 3 2.25 diesel question.
Replies
5
Views
392
Guidoma
G
davidpurton
Brakes binding..
Replies
16
Views
1K
steve2286w
steve2286w
R
Range EFI 3,9 cylinder head diagnostic
Replies
6
Views
903
roule
R
JoMo1974
Series 3 Cylinder head removal (109 2.6L petrol)
2
Replies
22
Views
2K
JoMo1974
JoMo1974
A
Buying my first ever Series 1
Replies
7
Views
548
saxavordian
saxavordian
Back
Top