Clutch kits?

nobber · May 22, 2018

Where is cheapest to get a kit from, 85 4 cylinder, dont want a britpart one.

kevstar · May 22, 2018

Get a valeo or borg & beck full kits are under 100 quid off bgay

nobber · May 23, 2018

http://www.lrseries.com/shop/produc...8358BB-CLUTCH-KIT-2-5-NA-TD-200-300-TDI.html#

Are AP really genuine kits?

kevstar · May 23, 2018

nobber said:
http://www.lrseries.com/shop/produc...8358BB-CLUTCH-KIT-2-5-NA-TD-200-300-TDI.html#

Are AP really genuine kits?

I'm sure they are ap driveline same company as borg & beck now from what ive been reading.
They are not ap racing clutches.

jamesmartin · May 23, 2018

nobber said:
http://www.lrseries.com/shop/produc...8358BB-CLUTCH-KIT-2-5-NA-TD-200-300-TDI.html#

Are AP really genuine kits?

were in the day ,like most just a badge for better than unnamed pattern parts ,theres very few old school mass manufacturers of quality parts,only the ones still used like valeo ,bosch ,denso etc

nobber · May 23, 2018

So what do you guys reckon , Valeo would possibly be the better part? The Valeo kits are cheaper than AP , not by a huge amount though.

jamesmartin · May 23, 2018

nobber said:
So what do you guys reckon , Valeo would possibly be the better part? The Valeo kits are cheaper than AP , not by a huge amount though.

i used to prefer borg and beck in their day but now use valeo as choice ,though to be fair ive fitted many britpart kits and others when supplied to me to fit and generally ive not had any issues

nobber · May 23, 2018

I think longevity would be the only thing but after 4 or 5 years or more I doubt it matters all that much anyway. Nothing worse than a noisy release bearing!

dag019 · May 23, 2018

I used valeo clutch plate and over, but have tired the britpart HD release bearing (ali rather than plastic) this has been in nearly two years now and has not been a problem, although I cannot say I have noticed any difference with it either so not sure if there is an advantage to the metal one.

lynall · May 23, 2018

As its an arse job I would get the best you can afford.

Seaswood · Oct 30, 2020

So if I may ask would there be a difference in clutch kit for 200 tdi & 2.5na?
110 Pu originally had a gas I believe.
Was going to order from Paddock or do they sell britpart?

jamesmartin · Oct 30, 2020

Seaswood said:
So if I may ask would there be a difference in clutch kit for 200 tdi & 2.5na?
110 Pu originally had a gas I believe.
Was going to order from Paddock or do they sell britpart?

same kit will fit from series 3 to 300tdi
britpart are a wholesaler they sell pattern as well as genuine depends what you choose to pay

Seaswood · Nov 2, 2020

Disco 200 TDI engine in 110 PU
The clutch parts fiche are noted with engine numbers since the engine is a disco transplant do I use a clutch for year of disco 200tdi engine or for the truck model year?
Replacing transmission with a rebuilt F series there is a D in truck now.
& clutch parts whilst all apart.

jamesmartin · Nov 2, 2020

Seaswood said:
Disco 200 TDI engine in 110 PU
The clutch parts fiche are noted with engine numbers since the engine is a disco transplant do I use a clutch for year of disco 200tdi engine or for the truck model year?
Replacing transmission with a rebuilt F series there is a D in truck now.
& clutch parts whilst all apart.

same clutch disco or defender 200 tdi

Clutch kits?

nobber

Well-Known Member

kevstar

Well-Known Member

nobber

Well-Known Member

kevstar

Well-Known Member

jamesmartin

Well-Known Member

nobber

Well-Known Member

jamesmartin

Well-Known Member

nobber

Well-Known Member

dag019

Well-Known Member

lynall

Well-Known Member

Seaswood

Active Member

jamesmartin

Well-Known Member

Seaswood

Active Member

jamesmartin

Well-Known Member

Similar threads