sailerman1951
Member
- Posts
- 21
Anybody tell me the actual size of the bolts tgat hold the front calliper carriers on please, cant shift them
P38 calliper carriers
- Thread starter sailerman1951
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 12,126
- Location
- Sud ouest France !
13mm, but use a socket that only has 6 faces. A ring spanner could burr the edges if they are a bit crusty!!
- Posts
- 16,475
Sure??13mm, but use a socket that only has 6 faces. A ring spanner could burr the edges if they are a bit crusty!!
I thought they were bi-hex....I can't remember!
- Posts
- 16,475
Just looked at RAVE - the Caliper bolts look single hex - but the carrier frame to hub are Bi-Hex possible in the 15-17 range.
EDIT: Looking at images on Goooooooogle - Aftermarket carriers use single hex and OEM use Bi-Hex....just to confuse the issue!
EDIT: Looking at images on Goooooooogle - Aftermarket carriers use single hex and OEM use Bi-Hex....just to confuse the issue!
- Posts
- 12,126
- Location
- Sud ouest France !
Ooer, I read that wrong....
Caliper to carrier, the carrier bolts are 19, using a regular socket.
Caliper to carrier, the carrier bolts are 19, using a regular socket.
- Posts
- 18,954
- Location
- Buckinghamshire, UK. ('95 DT)
Plusgas. Failing that apply some heat but be REALLY careful to keep the heat away from rubber and plastic.
- Posts
- 18,954
- Location
- Buckinghamshire, UK. ('95 DT)
Where are you? If close to Bucks you're welcome to pop round if you need gas to heat it up.
