Sticky? Britpart bits tried and trusted.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
If it doesn’t move, seal or stop something I think Britpart are ok.

Exactly. But if, say, you need a set of discs and pads to get you through the MOT, and you can’t afford genuine, can you go for Britpart? It’s nice to know. There are decent BP bits available.

Sorry but being able stop is more of a priority that getting something through an mot. If you know the right mot people it will get through anyway, brakes is one thing I will never buy Britpart. It may be unfair as they may well have taken on board the complaints they’ve no doubt had, but being able to stop is something I’d not take a chance on for the sake of the mot. Nothing against dodgy mot’s on paper, but I do like to verbally hear what is wrong so it can be sorted out soon.
 
I ordered about £500 worth of parts from DLS last year and I think about half of it was blue bags. I was going to send it all back but the bloke said he’d have rung me if he thought there’d have been a problem with any of the Britpart stuff as they know what’s ok and not ok.
 
If it doesn’t move, seal or stop something I think Britpart are ok.



Sorry but being able stop is more of a priority that getting something through an mot. If you know the right mot people it will get through anyway, brakes is one thing I will never buy Britpart. It may be unfair as they may well have taken on board the complaints they’ve no doubt had, but being able to stop is something I’d not take a chance on for the sake of the mot. Nothing against dodgy mot’s on paper, but I do like to verbally hear what is wrong so it can be sorted out soon.
I mean the discs and pads work just fine. Not just for MOT.
 
Experienced bods on here will have seen a lot of threads about quality problems with Britpart parts - while some are good, others are dire. What tends to happen is, a newbie buys Britpart, gets a dud, and swears off Britpart forever (and posts about it here).

I thought a positive thread would be better. At least people could look up on here whether a part they need is any good, rather than losing the blue box lottery and ranting about it. If I were at Britpart I would much prefer this.

Here goes:
Brake discs, hoses, pads, shoes
Air, pollen, crank breather and oil filters
all the other wholesalers have quality issues too
 
If it doesn’t move, seal or stop something I think Britpart are ok.



Sorry but being able stop is more of a priority that getting something through an mot. If you know the right mot people it will get through anyway, brakes is one thing I will never buy Britpart. It may be unfair as they may well have taken on board the complaints they’ve no doubt had, but being able to stop is something I’d not take a chance on for the sake of the mot. Nothing against dodgy mot’s on paper, but I do like to verbally hear what is wrong so it can be sorted out soon.
bp stuff does stop you same as any other std parts from general parts suppliers,bearmach allmakes etc all buy from the same places
 
I've had britpart shocks on my D2 since October '16. Absolutely faultless, I'd buy them again. No rust, seeping oil. Even the bushes still look okay, no play in them.
They've got a big 'britpart genuine parts' label on them, dunno if that means anything.
Got them from my local Indy land rover parts supplier. He said he'd never had any returns or problems with their standard shocks.
I've said it before on here, if you've got 3 price options on a part and short on cash, go for the middle one. Usually pretty safe.

Britpart injector loom fitted round about the same time as well. No issues whatsoever
 
I bought my landy at a knock down price as it both swivels were leaking, rear calipers were semi seized, new bearings needed all round and repairs to chassis.

There is absolutely no way id of been able to afford to replace everything with genuine (nor did I have the desire to). I've rebuild both axles, all brake discs, rear calipers, pads, swivels, seals, ball joints using Britpart parts, and even ordered my new chassis through them as waiting time was reduced. I will say I only use Timken bearings though.

I use fram filters for the services just because the closest motor factors supply them. I use the Landy daily lugging a trailer around etc and it performs faultlessly. Been running the Britpart stuff for 3 years with no issues to report.
 
I like to live in the fast lane so when I rebuilt my 200 TDI I used britpart pistons after a rebore:eek::eek:.
The price was unbelievably cheap but I forget how much, I googled the part number and island 4x4 were way cheaper than the rest.
Been in 4 yrs now roughly, no issues:cool:
 
Now a somewhat 'old' thread but, for me starting back in to Defender ownership, an excellent attempt to try and highlight the positives around any BP products and one I found very useful. Useful, despite the comedians, die-hards, bereaved, over-my-dead-body and you're-going-to-hell-in-a BP-handcart brigade;););) Love you all!

T.
 
Back
Top