Air suspension

Hi RR td6_2003 brixham Devon
Hi I was driving home and for no reason all lights went out eas but car was still up at ride height
On dash says air suspension in active had code reset you could hear compressor working but not raising RR so I bought the wabco kit off of eBay fitted that lights come on once reset but compressor does not work but when connected to a 12 volt supply works fine there's power to the relay in rear of RR but nothing past when lights are on is relay faulty as got new one to try
Car has moved a little no leaks as wood be I guess on bump stops thanks for your help

i tried the new relay didn't work so now think its time for a reconditioned compressor or new can get a new wabco from bearmach for £297

You really need to have the fault codes read or else you are spitting in the wind, is it coming up with eas inactive on the dash and have you tried the steering lock to lock reset.

Yes I have only way to reset. Code is with diagnostic
Fault was air resovoir fault to me means air compressor
Height sensor rear drivers side cleaned sensor now has not come back
What has stayed is air resavoir fault

Took rr to indie they diagnostics as compressor is still issue
turned compressor is fine but is now they say height sensors or wiring on rear as they are way out of range
so im thinking buy two height sensors and see where that goes
is there anything to check also
air resavoir fault

If the compressor isn't giving air or there's a leak and it isn't reaching the height it should be, wouldn't that give height readings out of range?

Thinking it would be the connector to the height sensor rather than the sensor itself that failed but not played with an L322. Too new for me.

hi found this free download some of you may know for landrover

https://www.linkedin.com/pulse/free-download-jlr-sdd2-v147-landrover-jaguar-diagnostic-angela-huang

http://diagnosticdelivery.jlrext.com/idscentral/

Terry14121976 said:

hi found this free download some of you may know for landrover
https://www.linkedin.com/pulse/free-download-jlr-sdd2-v147-landrover-jaguar-diagnostic-angela-huang
http://diagnosticdelivery.jlrext.com/idscentral/

Click to expand...

Seen something similar on the Jaguar forums. You need the Mangoose cable for it to work, I think.

back to air suspension found to be a broken rear height sensor replaced sensor drivers rear all I need now is for rr to have suspension recalibrated that's not going to charge me a fortune
I live in Brixham (torbay ) if any one can help
I must buy a diagnostics which one wood u recomend

Allcomms by RSW will probably your best bet for your own diag, comes from the States.

+1 on All Comms. I have the Icarsoft i930 which reads pretty much everything, but doesn't do calibration stuff. But only got it for my mates L322 and then he sold the car and cover the diagnostics cost, so now we have a tool sitting in garage that owes nothing !!

at mo got code
air compressor reservoir static when filling

Terry14121976 said:

at mo got code
air compressor reservoir static when filling

Click to expand...

Sounds like compressor is shot then.

tested air compressor works fine plenty of air comes out of pipe put finger over pipe with a job
just when its connected say air compressor static when filling
as the compressor is new the heat sensor and metal frame assembly is off of old knackerd compresser
to solve this wood I need landrover to upgrade the ecu to recognize the compressor
the frustrating thing is all it points to is compressor was height sensor (Drivers side) also changed that to correct one
been told could be the one way valve under n/s sill feels like im ****ing in the wind as no one knows what it might be