Freelander cranks but won't start

thanks nodge

Hi All HELP!!!!
So the regulator didn't cure it - HP Pump now replaced but put everything back except I've a sensor /power lead that I can't find the location for - thought I'd taken photos as I took em off but can't see this one!! Three pin plug Green/Brown + Blue/Black + it's either just white but may be yellow/white - so close but so far away!!!!!!!!

looks like fuel pressure sensor connector. connects to end of fuel rail

I agree

As above.
It's had the overly rail harness fitted. The green plug is in the correct place, plugged on to the rail sensor. The black plug is now redundant and should be tied out the way of anything hot or moving. It'll be disconnected from the EDC, so is safe to just tie out the way.

there different pictures of 2 different engines Nodge

there different pictures of 2 different engines

Click to expand...

i think one's an auto .. the other a manual
auto has a cooling system for the egr (2nd pic )
manual doesn't (1st pic )
i could be wrong .. over to Nodge
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

pardec said:

there different pictures of 2 different engines Nodge

Click to expand...

First picture is the OP's TD4 manual. The replacement green rail sensor plug is clearly visible plugged into the sensor.
The next picture down (looks like possibly one of mine?) is a TD4 auto, the EGR cooler is visible.
The green plug again is on the rail sensor.

hd3 said:

i think one's an auto .. the other a manual
auto has a cooling system for the egr (2nd pic )
manual doesn't (1st pic )
i could be wrong .. over to Nodge
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Click to expand...

Spot on hd3