130 TD5 correct rear brake disc?

I am mid replacing discs, pads, bearings on my 130 TD5s rear axle which is a salisbury but the brake discs FTC3846 don't fit, they are approx. 70mm deep and the ones which came off are about 60mm deep. Does anyone know what the part number would be for the ones that should fit? Also I got calipers to replace the existing based off the same parts diagram which said to use the other discs, are they likely to fit with the shallower discs?

Also do you know a supplier who would be likely to have them near the Slough area?

Thanks


Edit 22:32 18/5/17

I think I have now found the right parts and with any luck they will be here Saturday.

Might be worth giving dingocroft a call in High Wycombe.

wonderdust said:

Might be worth giving dingocroft a call in High Wycombe.

Click to expand...

Cheers, I did find their website but it said didn't show anything for the part numbers I needed. And Craddocks/DPD screwed up the order so I didn't get the bits either way.

I still can't find the axle number so could anyone confirm that the stub axle FTC3188 and hub FTC0942 are correct for a Salisbury rear axle with the welded on calliper supports. Also which gasket goes with the stub axle FTC3648 is from LA and FTC3650 is from KA but I don't know which I need.