A serious case of 'Flatulance'
- Thread starter blue beasty
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Jaswilliams
Active Member
- Posts
- 260
- Location
- zummerzet
Glad it's back and running.. Did enjoy the cake you cooked in the back at the Bath and West
blue beasty
Leaks an prone to bits dropping off
- Posts
- 61,025
- Location
- Gloucestercotshirewolds
blue beasty
Leaks an prone to bits dropping off
- Posts
- 61,025
- Location
- Gloucestercotshirewolds
It's apparent that one roof vent may have leaked in the past 
All cleaned up and shiney noo one fitted. About to have a bash at tother side
All cleaned up and shiney noo one fitted. About to have a bash at tother side
blue beasty
Leaks an prone to bits dropping off
- Posts
- 61,025
- Location
- Gloucestercotshirewolds
Job done, now to ponder why so much paint has blistered off the roof and bonnet?
Everywhere else is OK, guessing it's the sun but even the side that was facing south is fine.
Any ideas before I get the paint pot and yard brush out?
Everywhere else is OK, guessing it's the sun but even the side that was facing south is fine.
Any ideas before I get the paint pot and yard brush out?
Mick Guilbert
Well-Known Member
- Posts
- 466
Looks good, more pics please.
blue beasty
Leaks an prone to bits dropping off
- Posts
- 61,025
- Location
- Gloucestercotshirewolds
Bit tricky to get shots in the workshop
Most of the paintwork is reasonable apart from the roof and bonnet
The inside has survived well enough even though it was leaking into the cupboard and out the gas vent for the oven.
Bit frustrated because I want to sort the welding but I'm out of gas and skinted for another week or so.....worth it though to have her back
- Posts
- 8,988
- Location
- A bit sarf of Dorking
Paint lifting looks like it just didn't like what was underneath, then water, (ice too), dirt and primordial life have finished the job.
Glad you've got going on it again.
Glad you've got going on it again.
- Posts
- 8,988
- Location
- A bit sarf of Dorking
Read back to refresh my memory, and cam across these.
And
I think that your answer's in there.
And
Not happy with the finish because one of the many layers of paint seems to react with the new stuff but I'm going to leave it to dry and flatten it back before a second coat and hopefully that'll improve it.
Not going to strip back to metal because she's going to get scratched up anyway but even I have standards
I think that your answer's in there.
blue beasty
Leaks an prone to bits dropping off
- Posts
- 61,025
- Location
- Gloucestercotshirewolds
Possibly but I'm not sure why it's only the roof and bonnet. Even the wing tops are OK.
The roof was the last thing I painted and might have only got one coat (I can't remember tbh) and being the least seen I prolly skimped on the prep
I might try etch priming the whole area instead of just bare patches before repainting.
- Posts
- 8,988
- Location
- A bit sarf of Dorking
I'm no paint expert, but that sounds like a plan.
blue beasty
Leaks an prone to bits dropping off
- Posts
- 61,025
- Location
- Gloucestercotshirewolds
Only managed to get a few hours in through this week but did rub the bonnet down and get 3 coats of paint on as well as tidying up the wing tops and leading edge of the roof.
When I have time I'll do an in depth and informative thread on how to spend ages on preparation and STILL get a sh1te finish
Ooo and I've decided to coat the inside with custard in case of cake emergencies
The important news is I managed to get to screwfix and pick up some 1mm cutting discs so I'll try and sneak off early from work tomorrow to start butchering the footwells
When I have time I'll do an in depth and informative thread on how to spend ages on preparation and STILL get a sh1te finish
Ooo and I've decided to coat the inside with custard in case of cake emergencies
The important news is I managed to get to screwfix and pick up some 1mm cutting discs so I'll try and sneak off early from work tomorrow to start butchering the footwells
blue beasty
Leaks an prone to bits dropping off
- Posts
- 61,025
- Location
- Gloucestercotshirewolds
Finally grabbed some time to hack the rot out of the drivers footwell and cut a plate to fit.
All ready to weld as soon as I get some gas.
All ready to weld as soon as I get some gas.
- Posts
- 83,230
- Location
- Embasinga stocæ
have yu got to the back doors yet?
blue beasty
Leaks an prone to bits dropping off
- Posts
- 61,025
- Location
- Gloucestercotshirewolds
Nope, the back doors are now bananana....na.. flavour
I'll start cutting out tin worm on the outriggers tomorrow but fingers crossed she's pretty solid
blue beasty
Leaks an prone to bits dropping off
- Posts
- 61,025
- Location
- Gloucestercotshirewolds
After snapping 2 out of 3 manifold to downpipe studs I began to regret tinkering with the zorst
Took the manifolds of and welded nuts to the remains. One came out.....the other snapped flush so I've drilled it and it'll have to wait until I've added to my (non existent ) imperial tap collection
On the plus side the drivers footwell and one outrigger are welded so I'm close to motable condition....possibly
Took the manifolds of and welded nuts to the remains. One came out.....the other snapped flush so I've drilled it and it'll have to wait until I've added to my (non existent ) imperial tap collection
On the plus side the drivers footwell and one outrigger are welded so I'm close to motable condition....possibly
blue beasty
Leaks an prone to bits dropping off
- Posts
- 61,025
- Location
- Gloucestercotshirewolds
Took her for a little test run today after stripping down the rear wheel cylinders and cleaning up the bores with a little wet and dry the seals look to be holding which is good news. It looks like a small build up of Ali oxide just in front of the seal from being laid up was causing leaks but the seals themselves look good.
Will try the same with the fronts when I next get a chance. This is the first weekend this year I haven't needed to work on someone else's car
after stripping down the rear wheel cylinders and cleaning up the bores with a little wet and dry the seals look to be holding which is good news. It looks like a small build up of Ali oxide just in front of the seal from being laid up was causing leaks but the seals themselves look good.Will try the same with the fronts when I next get a chance. This is the first weekend this year I haven't needed to work on someone else's car
BB, just read your thread from start to finish, very interesting!
The pics of you greenlaning, are they in Happy Valley and bastard lane....they look very familiar! Fair play to you for taking her down the bastard, although it makes me feel less of a hero for 'conquering' it in my 90!!
The pics of you greenlaning, are they in Happy Valley and bastard lane....they look very familiar! Fair play to you for taking her down the bastard, although it makes me feel less of a hero for 'conquering' it in my 90!!
blue beasty
Leaks an prone to bits dropping off
- Posts
- 61,025
- Location
- Gloucestercotshirewolds
BB, just read your thread from start to finish, very interesting!
The pics of you greenlaning, are they in Happy Valley and bastard lane....they look very familiar! Fair play to you for taking her down the bastard, although it makes me feel less of a hero for 'conquering' it in my 90!!
Yep
she did get her fat @rse hung up a little at the bottom of bastard but some judicial jumping up and down sorted it 
Huddy84
Well-Known Member
- Posts
- 746
- Location
- East Anglia
Looks a fantastic vehicle and very homely camper. Really pleased to see you managed to keep hold of her, can't imagine there being many about.
