Ride height sensor

Hello there,
My mrs is stuck at the nec with our d2 with what appears to be a broken ride height sensor .
Is there anything she can do to equalise the air bags just to get her home?

cable tie senor to its securing point on trailng arm

Thanks Jamesmartin,
She has just sent some pictures over and the sensors look fine it looks like one of the air bags has deflated and the other side is over inflated

Apparently its reset itself.
I'll get it checked over on Monday

mrfreeze said:

Apparently its reset itself.
I'll get it checked over on Monday

Click to expand...

Fingers crossed it behaves and gets her home

Thanks blue beasty,
hope so.
I've never heard of them re setting themselves.
I,ve re named her Christine

I have spare sensors and bags and nanocom
Where are you, im on a ferry in acotland heqding hone and cant find my spex!

Hi bigeeeee,
we are in Halesowen just outside Birmingham

Obliged!

Found them

I have some spare bags for it.
I'll get it booked in on Monday for a check up.
There has to be a reason for it

I'm confused.
We had a plug in and there is no trace of a fault of any kind.
No leaks on the bags or anything.

Just read this and I know its weeks later but one of the air valves could have stuck shut temporally. It happens all time at work normally when water gets in the air pipes, I normally spray Teflon or silicon into the air pipes not wd40 as this has tenancy to get sticky. But if that's all you've got that will make do.