What have you done to your Freelander today

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Just a little one...Changed my non functioning rusty cigarette lighter to a duel USB outlet
2016-03-30-17h07m46.jpg 2016-04-05-12h23m32.JPG
 
Last few days, removed the sunroof and welded plates over the holes, so now watertight, replaced the motor as it was only clicking and wouldn't operate properly so now I've got a fully working sunroof. Replaced the coax cable for the radio, now I've more then 2 radio stations and sorted out the leak at the rear of the roof - I always thought it was the door seal, but it was actually the seal on the outside of the car above the door - Some serious leak there - I would advise people to check theirs If they have water in the boot area. Hopefully now I will have a dry tool box in the boot :)
 
Tiny1000 said:
Last few days, removed the sunroof and welded plates over the holes, so now watertight, replaced the motor as it was only clicking and wouldn't operate properly so now I've got a fully working sunroof. Replaced the coax cable for the radio, now I've more then 2 radio stations and sorted out the leak at the rear of the roof - I always thought it was the door seal, but it was actually the seal on the outside of the car above the door - Some serious leak there - I would advise people to check theirs If they have water in the boot area. Hopefully now I will have a dry tool box in the boot :)
Click to expand...
Any chance of a few photo's of what you did?
 
Sold it. :(

Gerty is gone, but I made a bit of profit on her so my hours in the garage weren't completely unrewarded. I wouldn't like to count the hourly rate mind you as I doubt it would be above the legal minimum wage.
So now I just need to get rid of my daughters Fiesta and the hunt will be on to replace her. Next time I want a diseasil preferably post 2001 with leather seats and all the toys. I fancy an L series to play with I don't like the seats as much, or the brakes or the rust underneath.

I still have the 04 K series so haven't left the fold completely.
 
I fitted some bargain priced HSE rear door cards that just happened to come with the Harmon Kardon tweeters left in place, making them a better value.
 
Realised that my towbar electrics have seemingly been professionally bodged... After realising that I had no indication of trailer indicators and with the knowledge that they deffinitely worked, discovered that the wiring loom had been (very well) chopped and rewired to make them work, presumably to save the cost of buying the 'uprated' relay. Have now ordered the proper relay!
 
Day off today so the plan was to go to the scrap yard only to find out it burnt down last night! Instead I decided to tackle my rear diff pinion seal oil leak, nope! that flange nut will not move, I even made a locking tool to stop the flange moving but it so tight it bent the bolt. With that idea scuppered I thought I would move on to the vcu bearings, one side of the prop came off like it was laying in butter the other side took 2 hours of wd40 & plus gas + persuding.

So after 7 hours I finally changed the bearings but still have a diff leak :-(
 
Paid for a clutch/DMF/clutch hydraulics to be fitted (£900 all in, including the devil). At 124K the DMF and hydraulics were pretty hoopajooped, even tho there was a bit of meat left on the friction plate. It now shifts gear like a dream.
 
You must log in or register to reply here.

Similar threads

B
Freelander 1 Freelander prop bearings replacement td4
Replies
15
Views
491
andyfreelandy
andyfreelandy
andyfreelandy
Other New Project starting today
Replies
3
Views
257
Alibro
Alibro
P
2006 Facelift TD4 Auto turbo vacuum boost solenoid
Replies
11
Views
461
andyfreelandy
andyfreelandy
P
Freelander 2 4wd problems
Replies
3
Views
562
pauld2296
P
proto57
Freelander 2 (LR2) Trouble Diagnosing Drivetrain Issue
Replies
13
Views
635
Nodge68
Nodge68
Back
Top