Oh no. What have I done?

She's a keeper

Silverlandy said:

She's a keeper

Click to expand...

You are indeed x


Right guys, without taking the door card off why does my drivers door window rattle about when it's halfway up?

glass channels worn

jamesmartin said:

glass channels worn

Click to expand...

New rubbers, guides ?

possibly though you could try carefully squeezing them up a bit

^ thanks James.
Stuck my new rims on today that a very nice chap dropped off for me yesterday.
Cheers Vilguy, top banana
Think it looks rather tasty myself

He is, of course, talking about the Silver one at the back

So finally got round to taking the door trim off to have a look and it appears somebody had removed lower front glass guide . I'm guessing it had bunched up and was grabbing the glass. Is it available seperately ?
Also, I've got to do heater matrix o rings which I've read up on and took panels off to have a look.
Doesn't look too much of an issue to do but wondered if o rings need any lube and I'm guessing the ali pipes move freely once screw is undone ?

3.5 efi said:

So finally got round to taking the door trim off to have a look and it appears somebody had removed lower front glass guide . I'm guessing it had bunched up and was grabbing the glass. Is it available seperately ?
Also, I've got to do heater matrix o rings which I've read up on and took panels off to have a look.
Doesn't look too much of an issue to do but wondered if o rings need any lube and I'm guessing the ali pipes move freely once screw is undone ?

Click to expand...

O rings are simple to do just go on YouTube n follow the tutorial do your self a favour and go by a 1ft long Philips from tool station, you will thank me afterwards

Hi, there is a How To guide at the top of the page on O rings, really are simple to do. Did mine in about an hour, as Dave mentions you will require a long screwdriver to reach screw and I found it easier to get the wife to wiggle my pipes in the engine bay when sliding out pipes to get to O rings and also when re installing them.

PPP38vouge said:

... I found it easier to get the wife to wiggle my pipes in the engine bay ...

Click to expand...

I know you love your RR but that's a bit specialist interest!

Thanks guys. Had looked at the vids and the how to on here.
Any lube or just coolant on the rings for assembly?

PPP38vouge said:

Hi, there is a How To guide at the top of the page on O rings, really are simple to do. Did mine in about an hour, as Dave mentions you will require a long screwdriver to reach screw and I found it easier to get the wife to wiggle my pipes in the engine bay when sliding out pipes to get to O rings and also when re installing them.

Click to expand...

Might do mine, not that they are leaking, if I can borrow her to wiggle my pipes

wriggerling pipes n playing with rings. you did actually type that out loud for all to read!!!! form a que to borrow his missis

Before he's had a go with the foot long philips, preferably.

Grrrrrr said:

Before he's had a go with the foot long philips, preferably.

Click to expand...

I'm not cutting 2 inches off mine to get 12 inches, and don't say I do not use it as a rule.

Yes gentlemen you may borrow the wife to wiggle your pipes, she will be wearing latex gloves as not to get oil under her finger nails plus I don't know where you lot have been, now do you require her in fetching overalls or the usuall stockings and basque, for a few quid she may blow through your pipes to get rid of your coolant too.

PPP38vouge said:

Yes gentlemen you may borrow the wife to wiggle your pipes, she will be wearing latex gloves as not to get oil under her finger nails plus I don't know where you lot have been, now do you require her in fetching overalls or the usuall stockings and basque, for a few quid she may blow through your pipes to get rid of your coolant too.

Click to expand...

I'll have a tenner's worth please.

im gonna go for a full 20 quids worth....... im a big spender

biketeacherdave said:

im gonna go for a full 20 quids worth....... im a big spender

Click to expand...

For £20 you get to watch me having my £10 worth