Disco Tray back build

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Watch this space mark ;) will put a photo up soon hopefully try and max the shocks out, worked out what was holding up the back axle in this photo, turned out it wasn't the A frame after all but I'm sure the x-eng joint will work fine!

 
Watch this space mark ;) will put a photo up soon hopefully try and max the shocks out, worked out what was holding up the back axle in this photo, turned out it wasn't the A frame after all but I'm sure the x-eng joint will work fine!


Nice, what was holding it back?
 
Nice, what was holding it back?

Jointed trailing arms where they are mounted on the chassis, when sitting level the arms are slightly tilted so when on flex they bind up, got new mounts sent out and hopefully have them next few days, then see if can max them shocks out haha ;) :D

Zoom in on the photo you'll see the arm isn't mounted level.
 
Jointed trailing arms where they are mounted on the chassis, when sitting level the arms are slightly tilted so when on flex they bind up, got new mounts sent out and hopefully have them next few days, then see if can max them shocks out haha ;) :D

Zoom in on the photo you'll see the arm isn't mounted level.

Ah yea I see, thats a Pain, where are they from?
how you finding the shocks btw?
 
From Rick was one of the first sets of arms said it was just his mistake and will send a new set out ASAP.
And yes shocks are great once got them set up at right psi, nice on the road as well.
 
Back
Top