airbags

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

td5284

Member
Posts
60
Ok i have a td5 es that has a coil conversion on the back. What do i need exactly to get airbags again and do i need ace. I would like to lift the front on coils and put the rear on bags with 2 " spacers. Do i need ace? And what else do i need for the full assembly
 
No, not all air suspended Discos had ACE. Mine doesnt.
You'll need the bags obviously and fitting clips. Are the ride height sensors still on the radius arms and connected? Is the compressor and pipework still on the vehicle? Would be under passengers floor, hopefully the pipework to the rear will have been tucked out of the way somewhere. But you have to ask why was it put on coils in the first place - failed compressor?
And once all that lot is back together the ECU has to be programmed to work on air again.
 
No, not all air suspended Discos had ACE. Mine doesnt.
You'll need the bags obviously and fitting clips. Are the ride height sensors still on the radius arms and connected? Is the compressor and pipework still on the vehicle? Would be under passengers floor, hopefully the pipework to the rear will have been tucked out of the way somewhere. But you have to ask why was it put on coils in the first place - failed compressor?
And once all that lot is back together the ECU has to be programmed to work on air again.
is that the slabs ecu. And can that be done on hawkeye or nanocom
 
Back
Top