What have you done to your Landie today.
- Thread starter madfrank
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Westwood8055
Active Member
- Posts
- 896
- Location
- Liversedge, West Yorkshire
Dan_Trials
Well-Known Member
- Posts
- 2,546
Started it (the Discovery) as it hasn't been started since last saturday, didn't need a jump start so I guess I'll fix summin else tomorrow!
- Posts
- 67,743
- Location
- halfway between here and there.
craykent
Active Member
- Posts
- 100
- Location
- abergavenny south wales
Took it to a landrover hospital for a new clutch and cam belt
was going to do myself but not up to it [ disability ]
feeling bereft atbthe mo
was going to do myself but not up to it [ disability ]
feeling bereft atbthe mo
top drive
Well-Known Member
- Posts
- 2,694
- Location
- Peoples republic of culter
discodrivercumbria
Well-Known Member
- Posts
- 3,317
- Location
- South lakes
Looked at it as i ran passed it cos it was pi----g it down, have to put new steering pump on this weekend as the replacement was worse than the orginal!! nowt like doing summat twice!!
danny6801
Well-Known Member
- Posts
- 1,665
- Location
- North Wales
Managed to to get the arches on, nearly ready for mot, just have to find out why the wipers and washers dont work even though the fuse is ok.
Looking good mate I've managed to spray mine now just a few more bits to stick back on.
Attachments
Made a good job of that mate, excellent
Found out why my nearside front sidelamp was dim by the way.......checked and rewired it and re earthed all the front end etc etc with no luck at all. still dim
Just found out someone had put a 24v bulb in it dooh !!
danny6801
Well-Known Member
- Posts
- 1,665
- Location
- North Wales
Made a good job of that mate, excellent
Found out why my nearside front sidelamp was dim by the way.......checked and rewired it and re earthed all the front end etc etc with no luck at all. still dim
Just found out someone had put a 24v bulb in it dooh !!
Haha no way there is always something about these vehicles to do and find out.
cornish rattler
Well-Known Member
- Posts
- 6,432
- Location
- Manc chester
Fitted a new ignition switch and ordered a set of H/D steering rods inc ball joints and a new drop arm / ball joint
Klm2
New Member
- Posts
- 65
- Location
- County Durham
Just looked under mine. GOT scared and ran away very quickly knowing that my MOT is due.
Westwood8055
Active Member
- Posts
- 896
- Location
- Liversedge, West Yorkshire
Haha, the mot dread, mine went in last Monday, it failed only on a pfew minor things surprisingly though, apart from a patch under bump stop but I already knew about it failed on headlights not level and brakes which are not braking even, am quite happy with that , I was expecting a lot worse!!
only on a pfew minor things surprisingly though, apart from a patch under bump stop but I already knew about it failed on headlights not level and brakes which are not braking even, am quite happy with that , I was expecting a lot worse!!
Littelwill
Well-Known Member
- Posts
- 3,065
- Location
- Lincolnshire
I love the fact that as landy owners we would rather the brakes not work properly than it have much rust! Haha love it!
Needed to fit air cleaner so as to mot and run landy till I find a suitable air cleaner box to link up to the snorkel
Found a Caterham kit that failed to sell on ebay last year and i had put back on the shelf so decided to use it.
Induction kit with cold air feed
Found a Caterham kit that failed to sell on ebay last year and i had put back on the shelf so decided to use it.
Induction kit with cold air feed
Attachments
elliot0850
Active Member
- Posts
- 184
- Location
- leicester
Got bored so made some skid plates for the centre silencer.
v8geoff
Well-Known Member
- Posts
- 3,327
- Location
- chippenham,wiltshire
Fitted new spark plugs to rangie after dinner sort out power to ecu
