what gadgets and gizmos have you installed?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

jonny2014

New Member
Posts
44
I love gadgets on cars,
So far I've fitted upgraded clock with voltmeter etc
Front fogs
Tow rope.
Upgraded led interior lights
Interior strip lights
Just wondering what other gadgets people have fitted
 
Got four blue angel eye spots to fit, cb radio, led work lamp, amber flashing leds in the grill and on the rear bumper
 
Kenwood BT73 DAB head unit. Clock/exterior temp (in place of clock). LED interior lighting. CG-Lock on seatbelt. HID headlights. CB mount on spare wheel. Tom Tom hard wired in. 12v auxiliary sockets fitted in the boot, Auxiliary socket fitted to centre armrest, Blackvue drive recorders fitted front and rear. scanguage 2.
 
Kenwood BT73 DAB head unit. Clock/exterior temp (in place of clock). LED interior lighting. CG-Lock on seatbelt. HID headlights. CB mount on spare wheel. Tom Tom hard wired in. 12v auxiliary sockets fitted in the boot, Auxiliary socket fitted to centre armrest, Blackvue drive recorders fitted front and rear. scanguage 2.

where did you get the clock with outdoor temp on mate?
 
Led light bar on roof, spot lights on lower half of the bumper (used an air con switch and swapped the cover from the blank switch above the rear fog switch to the air con switch that I etched a spot light symbol, makes the job look a bit more factory) , apline head unit installed with the hands free kit, steering controls for it retrofitted, led puddle lamps fitted, permanently live aux socket fitted in drivers cubby box, this means a power feed can go to the satnav on the windscreen with out the wires going across the dash, and a remote controlled relay and timer relay built in so I can press a blipper and my light come on for 30 seconds. Plans to add a switch so the reverse light can be turned on without being in reverse so they act as rear work lamps.
 
(used an air con switch and swapped the cover from the blank switch above the rear fog switch to the air con switch that I etched a spot light symbol, makes the job look a bit more factory)

Good idea!!! what about the wiring connections? got any pictures or diagrams of the process?
fitted front fogs over 1 year ago but I've had no luck finding a front fog switch at the breakers.
 
Led light bar on roof, spot lights on lower half of the bumper (used an air con switch and swapped the cover from the blank switch above the rear fog switch to the air con switch that I etched a spot light symbol, makes the job look a bit more factory) , apline head unit installed with the hands free kit, steering controls for it retrofitted, led puddle lamps fitted, permanently live aux socket fitted in drivers cubby box, this means a power feed can go to the satnav on the windscreen with out the wires going across the dash, and a remote controlled relay and timer relay built in so I can press a blipper and my light come on for 30 seconds. Plans to add a switch so the reverse light can be turned on without being in reverse so they act as rear work lamps.

Can you do a how to for the steering wheel stereo controls?, got a switch from tannaton but haven't fitted it yet as it's a retro fit..

O e here but not much cheaper than the full kit on eBay..
Electrical | Freelander | British Parts UK

Altho looks like face-lift will fit..
Genuine Land Rover Freelander 1 Front Fog Light/Auxiliary Lamp Dashboard Switch YUG000320LNF 1996-2006

Could try these
Land Rover Addict Forums
 
Can you do a how to for the steering wheel stereo controls?, got a switch from tannaton but haven't fitted it yet as it's a retro fit..

O e here but not much cheaper than the full kit on eBay..
Electrical | Freelander | British Parts UK

Altho looks like face-lift will fit..
Genuine Land Rover Freelander 1 Front Fog Light/Auxiliary Lamp Dashboard Switch YUG000320LNF 1996-2006

Could try these
Land Rover Addict Forums


I changed the whole steering wheel so wouldn't know how to do just the switches,it looks like you would need to cut a bit out the side of the wheel.
And as for switches I originally had a rear wiper switch fitted but wanted the little light to tell me they were on so the ac switch works grand,
 
I changed the whole steering wheel so wouldn't know how to do just the switches,it looks like you would need to cut a bit out the side of the wheel.
And as for switches I originally had a rear wiper switch fitted but wanted the little light to tell me they were on so the ac switch works grand,
It was the wiring mainly as I don't think the harness exists in the commercial?
 
Front spot lights on bumper, front fog lights,
LED rear work light,
LED interior lights,
Cathode tube boot lights,
RGB LED strip foot well lights, EL wire Cup holder light.....
 
Back
Top