inner tube supplier

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

wrickm

Active Member
Posts
106
Location
Virginia, USA
Does anyone have a good supplier willing to ship inner tubes to the U.S.? My Security 7.5x16 tyres are in good shape seemingly but i have one that's gone flat and needs a new inner tube. They are the devil to find in the U.S.
 
John Craddock stocks them. They do ship spares worldwide, it is strange that a simple commodity like an inner tube is difficult to locate in the States.
 
John Craddock stocks them. They do ship spares worldwide, it is strange that a simple commodity like an inner tube is difficult to locate in the States.

The only thing that uses tubes over here is tractors and atv's and those tubes are not for use with radial tyres.
 
I'm about to get my first set of new tyres in the UK and I'm still not sure what to ask for. At the moment it's on riveted rims and radial and I'm guessing tubes...I've never had to put a single squirt of air in in 20k miles...
 
Well John Craddock got back to me, but better yet a place in the U.S. called Rovahfarm has them in stock. So i get to hang on top my tubed tyres for a bit longer.
 
What's involved...not much...just need some large snap in valves....as long as the beads are not pitted that's it....my rims are riveted....been tubeless for years as are a few of my mates,

You may get some scaremongering saying the tyre will fall off the rim ect...never had a prob...

Punchers are not a prob as long as there only minor and not in the side wall...get your mushroom plugs on ebay cheap as chips.
 
Does anyone have a good supplier willing to ship inner tubes to the U.S.? My Security 7.5x16 tyres are in good shape seemingly but i have one that's gone flat and needs a new inner tube. They are the devil to find in the U.S.

Come on you can go to any tyre place and get them........ Hell NAPA can get then for you

Fook ebay has them for $33-$35...........:emps1::emps1:
 
What's involved...not much...just need some large snap in valves....as long as the beads are not pitted that's it....my rims are riveted....been tubeless for years as are a few of my mates,

You may get some scaremongering saying the tyre will fall off the rim ect...never had a prob...

And fitting 16 1/2" tyres won't be a problem either.
 
What's involved...not much...just need some large snap in valves....as long as the beads are not pitted that's it....my rims are riveted....been tubeless for years as are a few of my mates,

You may get some scaremongering saying the tyre will fall off the rim ect...never had a prob...

And fitting 16 1/2" tyres won't be a problem either.

Not if they are tube type rims
 
Come on you can go to any tyre place and get them........ Hell NAPA can get then for you

Fook ebay has them for $33-$35...........:emps1::emps1:
searched ebay only found them for tractors so wasn't sure that would work. Tried my local NAPA and the specifically said they could not get them.
Some of the issue is not knowing the actual product ID. I didn't want to guess on something that owuld fit a tyre not sold in the U.S.
 
Last edited:
searched ebay only found them for tractors so wasn't sure that would work. Tried my local NAPA and the specifically said they could not get them.
Some of the issue is not knowing the actual product ID. I didn't want to guess on something that owuld fit a tyre not sold in the U.S.

Look Junior........ I typed in 7.50-16 inner tube and so many different places showed up. Where the fook you at in Virginia? I'll find you the place to buy them at. And what makes you think you need a tube in them?
Now don't be a thick yank.........NAPA AUTO PARTS

I have spent a fair amount of time in Virigina
 
Last edited:
Look Junior........ I typed in 7.50-16 inner tube and so many different places showed up. Where the fook you at in Virginia? I'll find you the place to buy them at. And what makes you think you need a tube in them?
Now don't be a thick yank.........NAPA AUTO PARTS

I have spent a fair amount of time in Virigina

wow your pretty much an ass. Sorry i asked a question about something i was uncertain about based on lack of experience.
 
Back
Top