- Posts
- 10,639
- Location
- Oxfordshire
look good to me, just the job 
Defender 300 TDi Project!
- Thread starter SJW2511
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Rawly86
Active Member
- Posts
- 571
- Location
- Bedfordshire
look good to me, just the job
+1 they look good
alexander.mackinnon
Member
- Posts
- 79
- Location
- Surrey
Great thread ! Thinking of wrapping mine soon, any advice ? Tar
- Posts
- 10,639
- Location
- Oxfordshire
ifloochies
Well-Known Member
- Posts
- 866
look good to me, just the job
+1 your ride looks fabulous
I have a question about the spare wheel. I was going to keep the standard wheel as a spare, it's about 1.5 inches smaller rolling radius then these new wheels. Would only ever be used in emergency to get me home. My mate thinks it wouldn't work as the rolling radius difference would cause transmission wind up. I thought though it would be Ok as long as I didn't engage diff lock.
What's the answer?
What's the answer?
You will be ok for temporary use, the diff will compensate for different rotating sizes. You would probably be ok in diff lock too as you shouldn't be engaging it on good traction surfaces anyway so the wheels should be able to slip occasionally if they do start winding up.
Has anyone else noticed the massive increase in other Defenders about on the roads? I can only deduce this to having something to do with our weather lately, I always seem to be taking mine out as it just seems so much more applicable then my other normal car in these conditions.
Oh and tried my transfer box lever today and its quite stiff, probably through lack of use, I read it will need a spot of oil or WD40, anyone point me where im meant to oil?
Oh and tried my transfer box lever today and its quite stiff, probably through lack of use, I read it will need a spot of oil or WD40, anyone point me where im meant to oil?
Last edited:
I can't say I have but that's probably because there's a high number of them where I live in North Yorkshire anyway.
And yes some wd40 on all the working parts/pins in the linkage underneath it should free it up whilst exercising it but let the wd40 work its way in first. That freed up one of my disco ones although can't say I've done it on a 90.
flat
Well-Known Member
- Posts
- 9,075
- Location
- Far away from you!!
nah about normal, then in the countryside every tom, dick and harry has one. There are about 12 within a few miles of me, i see the same ones everywhere I go. there is a series 1 near me aswell, the guy uses it to get logs out the woods
