blue beasty
Leaks an prone to bits dropping off
- Posts
- 61,039
- Location
- Gloucestercotshirewolds
2 landies? one towing. One behind you to act as a braking vehicle?
What could possibly go wrong?
Suspected bottom end failure
- Thread starter Igloo
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
What could possibly go wrong?
gozzy
Active Member
- Posts
- 418
- Location
- stratford upon avon
do you want to let me know when u are on ur way there and ill come aswell see if we can rig something together so it will work, i am trying to ask around to see if i know anyone with a towing bar
Igloo
New Member
- Posts
- 377
- Location
- Nr Redditch, Worcestershire
What could possibly go wrong?
Think that's a bad idea :-/
- Posts
- 83,230
- Location
- Embasinga stocæ
Yu will have brakes. Just no servo, so they will be very hard.
Igloo
New Member
- Posts
- 377
- Location
- Nr Redditch, Worcestershire
The AA are on the way out.
My uncle has AA.
Will see what they can do. Only have basic cover so might not be enough to get to a garage?
Cheers for the responses all looks like a bar might be a good purchase!!!
My uncle has AA.
Will see what they can do. Only have basic cover so might not be enough to get to a garage?
Cheers for the responses all
looks like a bar might be a good purchase!!!
blue beasty
Leaks an prone to bits dropping off
- Posts
- 61,039
- Location
- Gloucestercotshirewolds
+1 Effectiveness not compromised but amount of effort required is multiplied a few times
Last edited:
- Posts
- 83,230
- Location
- Embasinga stocæ
I made one. Fitted tow ball onto front bumper and then length of scaffolding pole with tow hitch at both ends.
blue beasty
Leaks an prone to bits dropping off
- Posts
- 61,039
- Location
- Gloucestercotshirewolds
The AA are on the way out.
My uncle has AA.
Will see what they can do. Only have basic cover so might not be enough to get to a garage?
Cheers for the responses all
Roadside assistance (basic cover) includes a tow to a local garage
tomtomtom
Active Member
- Posts
- 240
- Location
- Evesham, Worcestershire
I'll keep an eye on the thread. Let me know if you still need me!
Tom
Tom
Igloo
New Member
- Posts
- 377
- Location
- Nr Redditch, Worcestershire
AA are sending out a flatbed after the initial guy came out.
Cheers for the great response!!!!!! Really appreciate it!
Cheers for the great response!!!!!! Really appreciate it!
- Posts
- 83,230
- Location
- Embasinga stocæ
no tel numbers for either tomseries3tom or p3cca
Bromsgrove Defender
Well-Known Member
- Posts
- 5,759
- Location
- Out to lunch
Sorry left me phone charging, While I went out......
All ok now?
All ok now?
adam300tdi
Active Member
- Posts
- 639
I had bottom end failure once.spent the hole day on the toilet
Bromsgrove Defender
Well-Known Member
- Posts
- 5,759
- Location
- Out to lunch
Are ya sure it int the crankshaft damper thats gone. Does sound awfully similar
If ya can move the fan by hand 45 to 90 degrees I'd say that were it. N.B. you can do this with the engine off
If ya can move the fan by hand 45 to 90 degrees I'd say that were it. N.B. you can do this with the engine off
Igloo
New Member
- Posts
- 377
- Location
- Nr Redditch, Worcestershire
The disco is at the garage.
It's not mine it's my uncles.
It sounds buggered. But it sounds like it's running ok. If that makes sense. It's a deep thumping sound. With the sound more noticeable through the air box pipe?
It's not mine it's my uncles.
It sounds buggered. But it sounds like it's running ok. If that makes sense. It's a deep thumping sound. With the sound more noticeable through the air box pipe?
bugmania
New Member
- Posts
- 176
my old disco one had that turned out to be a bent push rod
Igloo
New Member
- Posts
- 377
- Location
- Nr Redditch, Worcestershire
my old disco one had that turned out to be a bent push rod
We're thinking possibly a valve?
Though, Bizzarely it ran fine just before it stopped. We went and head breakfast then it was making this noise? :boom:
ZakiAK
New Member
- Posts
- 17
- Location
- Alvechurch, Worcestershire.
Sorry fellas. I was on exercise with my Squadron.
I hope that your landy is fixed soon.
I hope that your landy is fixed soon.
This is how mine sounded when the conrod nuts came loose, thus knackered big ends. I wouldn't say it was a deep sound, very sharp and metallic.
Land Rover 300TDi knocking - YouTube
Igloo
New Member
- Posts
- 377
- Location
- Nr Redditch, Worcestershire
Sounds nothing like that. It's a much deeper sound, With no metalic rattle?
