What have you done to your Landie today.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
nrgserv said:
believe he's got a mooring at Hartlepool.
lives somewhere between leeds and Donny.
cracking bloke, I rewound a starter solenoid in the galley of his, erm, "vessel", when it was moored at Selby.
first introduction to him, 3 miles of varnished copper wire to wind back on the coil.
lasted 3 years that starter!
Click to expand...

:hysterically_laughi Wondered why you was talking to one of them from the dark side :eek::eek:
 
well thanks to the Newbury sortout
and a spot of ebaying

over the last few evenings.
+2 blocks and +2 terraferma springs fitted.
cranked bearmach trailing arms fitted.
-2 shock lowering plates fitted.
converted the hateful shyte rubber feking rear shaft
to a 200tdi unit.
designed and made a small instrument pod to mount
the control head of my HF radio and sat nav unit.
fitted roof light bar.

much left to do but its getting there.
 
New brake light fitted on the 90 as the old one kept spitting the bulb out, new water pump and front brake pads on the disco

Maybe tomorrow investigate what I thought was a clutch noise and is now sounding more like a gearbox noise:eek::eek::(
 
Looked at replacing the weeping auto box oil cooler pipes on the missus' 300tdi, made some excuses & decided to put it off for a week or two so we can de-cat the pipe & replace the auto gearbox filter at the same time, also i have a cold, and a cough, and it was raining a bit and i wanted to go for a drive. But did take 10 minutes to do the penny (well 5 cents in this case) fix on the belt tensioner, cos despite a new new belt & a new tensioner it were still horribly noisy & bugger me the belts now completely silent.... brilliant.... so took the 200tdi out for a drive and did this (see photo) ... which was a massive pain in the arse to get out of.

IMAG0515_zps59c85fd5.jpg
 
ShayneJ said:
well thanks to the Newbury sortout
and a spot of ebaying

over the last few evenings.
+2 blocks and +2 terraferma springs fitted.
cranked bearmach trailing arms fitted.
-2 shock lowering plates fitted.
converted the hateful shyte rubber feking rear shaft
to a 200tdi unit.
designed and made a small instrument pod to mount
the control head of my HF radio and sat nav unit.
fitted roof light bar.

much left to do but its getting there.
Click to expand...

I'de get some +2 bump stops aswell! dont wana destroy you shocks
 
You must log in or register to reply here.

Similar threads

C
Freelander 1 crank no start
Replies
0
Views
375
chazy
C
1988smithy
Hill and Ditch 4x4 28th April 2024
2
Replies
20
Views
765
Anaconda
A
Dabbster
L320 2.7 Fuel fault
Replies
4
Views
477
Dabbster
Dabbster
S
Bulkhead swap 300TDi Defender
Replies
15
Views
2K
trax99
trax99
F
freelander td4 2002 steering shake when going uphill?
Replies
7
Views
378
frenchdave
F
Back
Top