tailgate window setup

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

malcolm54

New Member
Posts
6
After fitting new cables to tailgate regulator i tried to recalerbrate it, it keeps beeping when it gets to the top and goes back to the bottom and stay their, how can i sort this, can anyone help, i have tried changing relays but that did not help.
 
it senses that it has not reach the top , as when you do wind the tailgate window up if it does not reach the top it will go down to the bottom , so look at the sensor,just to note when in your car you can only stop the window on the downward stroke not on the upwards, hope this helps
 
thanks for the reply, i sorted it today, managed to get it all working and stopping window in any open position,next problem it not dropping enough to clear top gaurd when opening door but i will need to buy another set of cables.
 
they got damaged through ill fitting on my part. i watched youtube videos on subject, but even that the videos where correct they only showed how to rebuild the unit back together, they could have done with showing the fitting and aligning back into the door. the set was only £20 anyway. i have the full workshop manual on disc even that doesnt teel you, saying is you learn by mistakes, i did.
 
Back
Top