Freelander V6 ECU

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

FrankZim

Member
Posts
38
Location
Redcliff Zimbabwe
Good Morning.

I need a bit of help. I need to replace my Freelander V6 ECM, Alarm Unit , any idea of where i could purchase the whole lot. Do i have to replace the Gearbox ECU when i replace my Engine ECM and alarm Unit.? Do i also have to purchase a new ignition unit and Keys? Heeelpp
 
You need the engine ECU and alarm ECU + keys iirc. I'm not sure about the remote fob. The gbox ECU should be ok to reuse. Ebay is a good place to look.
 
Hi of course it can be repaired - all that has been made by human, can be repaired by them as well, the only question is it worth doing it...I repaired dozens of them.. What year is your Freelander? Is it 2.5? You need to change parts that contain immobilizer function - ECU + immo box + keys. Gearbox control unit contains no immo data... Also after replacement you'll have to synchronize remote control...
 
Depends what they do during the repair. If they know which signal is faulty and on what pin, they could trace the components used by following the copper tracks and replace the output parts only, sourced from an identical ECU. They may have drawings and parts lists which would make it easier.
 
Back
Top