mark666freelander
New Member
- Posts
- 221
- Location
- aberdeen
Whats this ?
- Thread starter mark666freelander
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
mark666freelander
New Member
- Posts
- 221
- Location
- aberdeen
anyone ?
Phil E
Member
- Posts
- 35
- Location
- North Kent
Yes it is. The reason I know? I have a brand new one in front of me purchased today!
mark666freelander
New Member
- Posts
- 221
- Location
- aberdeen
Thanks for the mate well it seems my one is fine had the fbh fire up on me to night i thought the car was going to blow up 
Phil E
Member
- Posts
- 35
- Location
- North Kent
Must be cold then up in Aberdeen!!
Incidentally, how easy is it to get to get the bumper off to get to the sensor?
Hoping to replace mine tomorrow or whenever my daughter allows me to have my car back!!
Incidentally, how easy is it to get to get the bumper off to get to the sensor?
Hoping to replace mine tomorrow or whenever my daughter allows me to have my car back!!
mark666freelander
New Member
- Posts
- 221
- Location
- aberdeen
Yea its getting cold up here now living right next the the north sea dont help either am not sure mate my fl has had a knock at some point in it life so theres no grill in that part of the bumper
am not sure mate my fl has had a knock at some point in it life so theres no grill in that part of the bumperDann
Active Member
- Posts
- 545
- Location
- Middle Earth
The self tappers are poor quality and corrode, I had to use 'Mole' grips to get them out, they were replaced with galvanised self tapping screws. The bolts behind the headlamps were also rusted solid and were cut out with a small angle grinder. They were replaced with stainless and now front bumper removal takes 5 mins. If the grille was removable this job would be simple. Cheers.
Phil E
Member
- Posts
- 35
- Location
- North Kent
