What have you done to your Freelander today

I had code p0240 a week or so back, after a long high-speed journey.

I checked the turbo hoses for holes/splits and clips/clamps for tightness, and it turned out one hose (the 90degree bend one) was a cm too short and despite keeping on re-positioning it and re-tightening the 'T'-Bolt clamp on the beggar, it was determined to slide off.

Problem solved - phoned Gareth at DPH yesterday - replacement hose arrived this morning. Hows that for service - well done DPH! :clap2:

Now fitted - all is peachy-dandy again.

Singvogel.

Mine didn't like the transit pushing it down the road so it very cleverly chucked it aux belt tensioner at it! Bloody inconsiderate, another £50

changed abs pump , cross threaded one of the inlet pipes tookit back off again n threw a strop at not being more carefull !!

topped up with gearbox oil.....again

I let my OH borrow mine today for the first time

FreeJander said:

I let my OH borrow mine today for the first time

Click to expand...

fool

New belt tensioner! Grit in the bearing finished it off!

thought i was never going to get to the end of this thread

jasper08 said:

thought i was never going to get to the end of this thread

Click to expand...

You haven't - yet!

S.

Drove it 14 miles and nothing fell off

Diesel Do said:

Drove it 14 miles and nothing fell off

Click to expand...

Ditto

Just fitted a new set cam belts to me V6's replacement engine!!

Nothing, i sold mine a few weeks ago. Miss the fuel economy of it though. 37 beats 25 haha.

That said, the replacement disco3 hse is a very nice car. And is currently more reliable than the freeby.

Ralph MOT'D today, 2 advise, NSF track rod end joint, and hand brake just above minimum efficiency. will do both next week when I'm off.

topped up gearbox oil....

Handbrake cables fitted! hopefully drop links tomorrow weather permitting.

Took it panic parts shopping!


DD

Put winter kit in boot new air pump micro spade 6.5 ton tows trap and 800amp jump leads

Well it was last night actually. I fitted the front end plate, cam covers and oil pick up complete with a new O ring.

Now in work earning money to fix it when the next thing breaks